Help me solve static electricity problem

Vhiner, I used equal lengths of 14 gauge solid core copper wire from Lowes. Attach one end with a screw on the chassis and the other to one of the ground posts on the Ground Disruptor.

Puremusic,

Thanks for the help. I'll have to save up for the disruptor.

I gave up and took up my rugs.

I got a nice Parasound A23 amp and P3 preamp pair from this site. As soon as last winter arrived, one modest static touch blew out the pre, to the tune of a $300 repair. I tried to be careful afterwards to discharge before I touched it. But, alas, first cold day this winter I transmitted a static charge so small I could barely feel it, and poof! flashing lights, preamp dead again. I've had it now, and rather than repair, I would like to replace the preamp with a different brand/type that isn't so susceptible to static electricity damage. All advice welcome.

Anyone with knowledge of Capacitors? What would happen if the chassis of each component were connected in starfish pattern through capacitors to one central ground point and then on through another capacitor to a common ground? Would the capacitors act to absorb the static discharge and then slowly release them to ground? I'm not 100% sure how caps work but they seem to behave like water hammer arrestors sometimes.