High Powered Wireless Network for Audio

The only wireless speaker experience that I've had was with my subwoofer. When I had it hooked up wireless I couldn't print with my wireless printer. The subwoofer would also get some interference during internet use, but not a lot.

Is it possible that you're speakers are having some of the same issues?

I agree completely with Ballan's suggestions. Moving from an 802.11g to an 802.11n wireless router will give you greater range and eliminate the interferece from devices like cordless phones and microwave ovens, which use the same frequency band as 802.11g. That means, though, that both ends of the wireless connection have to be 802.11n. Your computer will need an 802.11n wireless card or external adapter to take advantage of the 802.11n access point.

One thing you can try with your current 802.11g setup is to switch the wireless channel. There are 11 channels available for the communication between your computer and your wireless access point and you might be able to get rid of the interference from other devices by switching from the default channel to one of the other ten channels. It won't help if the problem is signal strength but it might help if the problem is interference.

With the Apple Airport Express you specify the channel in the setup utility that is part of the system software. With other wireless routers you'll have to do it through their setup application or through browser access to the setup parameters. They're all different so you'll have to wade through the setup instructions that came with your router.

The notes contained herein on your router being the propulsive engine for your inter home operations is true.

The DSL aspect only would apply to those machines drawing directly from the internet some audio of video stream (s), or other info/data.

Merely playing video or audio files from some networked drive on the premises and conveying it to some other networked pc or mac, has noting to do with DSL speeds, thru put, etc. that’s all on your NIC cards/wireless adapters in your various wirelessly connected and networked hardware.

Please see:

http://compnetworking.about.com/od/wirelessrouters/f/bestwifirange.htm

80211G is fast enough to handle most any file type, IF CONFIGURED PROPERLY in the network adapter of the computer or device itself… and there’s no physical barriers to overcome via the signal broadcast freq.

What I think you need is either a stronger signal producing wireless router, or maybe, just a better antenna for the one you now have… or for the units trying to cnnect to it.

I’d also look into repositioning my wireless router. I’ve used D link in the past with pretty good results. I’m with FIOS and now have their Westell all in one router, modem, etc. only right in my office will I experience any issues usually…. That’s where the Westell unit resides. Otherwise, I can stream/watch DVDs off a NAS drive via every pc I own now, any place inside or within reason, outside the home smoothly…. Even with my 1.8GB CPU laptop running Vista!

For a time, I had a desktop using a D link USB wireless device. it was fine too in terms of connectivity and responsiveness.

Think about moving the router first, instead of replacing it. Look into the better antenna idea too. going up to N also means changing out NIC cards in each networked device… if that is possible to begin with… and not just the router itself!

Good luck.

CW,

In addition to the excellent suggestions offered above, you may want to consider the idea of having a wired router, and a separate wireless access point, which in turn would be wired to the router. Depending on the physical locations of your networked devices, it may be very helpful to have the greater flexibility that would provide in terms of wireless access point positioning, and perhaps antenna orientation as well.

I too use Cablevision's Optonline service, btw, and it is fabulous. I pay a bit extra for their Optimum Boost option, which advertises 30 mbps downstream/4 mbps upstream. At my location in Connecticut it handily betters those speeds, usually giving me about 32 and 5, as measured via the Speakeasy.net speed test. As you may be aware, Cablevision also offers 100 mbps downstream speeds (!), although at much greater cost.

Keep in mind also that with an always-on high speed cable connection, firewall protection (via either hardware or software) assumes added significance. I prefer a hardware firewall, in part because it eases the burdens on the computers, and in part because the models from SonicWall are extremely good, although relatively expensive.

My home network pre-dates -N, and is all 54G. I use a SonicWall TZ170 hardware firewall/wired router, which cost about $450 a few years ago. Comparable current models, at similar or lower prices, are considerably more powerful than the TZ170, which has served me beautifully. See the listings and prices at NewEgg.com.

I use a 54G wireless access point and signal amplifier from Hawking Technology, which I have also been very pleased with, in terms of range, speed, and the ability to handle multiple wireless devices simultaneously. I have no knowledge of their -N products, but I would expect them to be well worth looking into.

Best regards,
-- Al

I had much improved results going to an Airport Extreme (which is wireless N) from a G router. The N router has different wave lenghths (compared to the G) that allow it to pass through walls more easily. Before I had very little signal upstairs, and after the switch I have a very strong signal upstairs.