2. tech-talk
  3. 1319920176

Know anything about the BSG Technologies QOL?

Hi there, I just saw a local dealer advertising this on craigslist, They wont tell you anything about it except it works, it half sounds like snake oil and half sounds like it could be something.

They claim it is all analog and retrieves inner detail and has the "WOW FACTOR".

My guess after talking to the guy is is might be disgned around smoothing out microphone curves maybe? or sending out a ton of above 20KHZ info to do some pshycho acoustic/room type thing?

I'm just tripped out they wont tell you anything except, well set it up, if you like it awesome if not dont buy it.

I am genuinely intrigued to see if its truly real and if anyone has expreience. It would be nice to save a long drive to hear something or have something to look forward to on the drive.
systembuilder
rx8man's avatar
rx8man
1,484 posts
 
I'm very interested as well, esp if there is a possibility (down the road) to incorporate it within my Dac?
ozzy's avatar
ozzy
7,579 posts
 
Preale, Did you find much difference in sound quality between the fresh out of the box and the 150 hours of use?
marc777's avatar
marc777
116 posts
 
Ozzy From my seat the unit sounded good fresh out and has slightly improved over time. The one thing of note was it takes about 20 minutes to warm completely up and this you will hear. Just as in an amp.
preale
34 posts
 
The unit operates in the analog mode: so, it is placed between the preamp and amp. Sound quality improved considerably after break in, as it is with all electronics. Also, since I had to use an extra pair of XLR cables, they had to be broken it as well. I continued to break the unit in by running my FM tuner through the preamp and BSG for a couple of days. I also noticed a perfect synergy between my Bybee devices (which are between DAC and preamp, as well as Golden Goddess Speaker Bullets on loudspeakers).
marc777's avatar
marc777
116 posts
 
I noticed much more difference between cables burning in than the qol unit. Also Larry Kay (president of BSGT) said the same about qol in his high-end system. You may have heard more of the cables burning in than the qol unit itself. It does work in the analog mode, but it can be placed before pre-amp or receiver or through tape loop if wanted. From my experience after pre-amp is the best and with balanced connections. Elsewhere a loss of air and excitement was noted in my system
More to discover