System feedback coming thru speakers.....help

A p.s. to my previous post. Looking at the information on your preamp at the CJ website, although I realize you said that the tube types at locations 4, 5, and 6 are correct, just to be sure I'll mention that if a 12AX7 or 5751 were placed at the V5 and/or V6 locations, instead of the 12AU7's that are supposed to be there, it might result in the symptoms you have described.

Also, it can be inferred from that information that V1, V2, V3, and V4 are all only relevant to the phono input, not to the line-level inputs (where the CD/DVD player should be connected, of course).

Regards,
-- Al

Hi TPG,

To Jdvorak's credit, the process you descrive is exactly what he has done. He has so far determined there is complete silence with the volume on the preamp loud with teh amp on...providing there is no source connected.

So it appears to be the source of the interconnect. So he needs to connect a new source thru the same interconnect and see. If no noise, it is the source. If noise, it could be the interconnects.

Jdvorak? Any news?

wow, you ALL are amazing! thank you for your advice thus far.

UPDATE: Still not solved, but here is what I have done.
i found a grounded outlet in the house near a brand new washer/dryer my landlord recently had installed. pretty sure it's grounded, it has 3 prong.
I ran an extension cord from my strip to that outlet, still just using the amp, pre and 1 source.....still an issue. I changed source components, I also changed interconnects.....still an issue.
If I turn volume all the way off with the CD player playing, the noise goes away......but when I turn volume up, the noise/static/"pops" present. the louder I turn it, the louder the noises get.
My electrician is coming tonight, but I think less and less that it's the power source....although another grounded outlet is needed in this place! :)
could it be the tubes? i have no idea how good/old/hours there are on them. I do know that the !2AU7's are in correct place.....but not certain if they are all good or not.

HI Jdvorak,

i believe you said when you plugged in just the pre and the amp...with no source plugged or connnected...you could turn the preamp volume way up and there was no noise.

Is this correct?

Lloydelee21, correct. nothing. no hum, no nothing.