Disadvantages of OP amps in output stage of CD?

BW, Unfortunately, you are speaking to a somewhat non-technical person. Though, I greatly appreciate your advice and explantion. This player as noted was modded by Mapleshade Audio, the music and tweek internet company. In all fairness to its sound it does have lighting fast transient response and a low noise floor. BTW, I did make a speaker cable change (downward) before acquiring the Cambridge 550C. When I had the Rega Apollo in system, the differences with the less expensive cable (Audio Art SC-5 standard) were apparent but could be lived with. When I plugged in the 550C,. those differences became much more pronounced. The sound was bleached on the top end and through most of the midrange; this is the exact opposite of what I anticpated. and lacked any musicality.

As it stands now, I have ran 550C to about 100 hours burn-in, and 25 hrs actually play time. It sounds the same The third party seller could offer "only" his regrets that the player did not "work well" in my system, which is not a general audio premise I subscribed to I am not going to put anymore money into trying to get 550C to sound better by adding an even inexpensive DAC like the Peachtree I-DAC or eqivalent If anyone has any additional suggestions, please let me know. Otherwise, I intend to sell the unit cheaply, take a finanicial bath, and move on. Jim

As it stands now, I have ran 550C to about 100 hours burn-in, and 25 hrs actually play time.

you know, this just might not be enough time to break-in the mods. all Accuphase components need 500 hrs minimum. I've heard this for many other components. Personally I had to break-in my Virtual Dynamics cables for 300+ hrs per the factory guideline.
So, it's entirely possible that you are making a premature decision/judgement that the Cambridge does not sound good.....

Disadvantage- loss of transparency (as compared to a well executed discrete output) and coloration of sound either north or south of neutral.. IME

Advantage- ability to color the sound by rolling op-amp to suit your taste.

I feel a bit obliged to comment here as it appears SOME of your intial comments may have come from my responses to your previous posts (although seriously misquoted).

The CA audio products (like many others) use IC opamps (monolythic integrated circuits) in their analog output stages. From my direct listening experience, some of the criticism leveled at the CA CD players (like the 840C I own) of "bright" sounding sonic signatures may be directly related to these opamps. If you feed the digital output (upsampled or native) to an outboard D/A with a well designed class A discrete component analog output stage, many of these sonic abberations are abated. In the 840, CA uses the OPA 2134 series opamp which is considered by many to be a mid level amplifier. My comments are limited to the CA 840 with which I have direct experience. By the way, I have noted similar characteristics in an Parasound P3 preamp which uses similar OPA2134 opamps. There is considerable info on the sound of opamps in the headphone community if you want to see how many audiofiles view and rank various opamps. The 2134s are considered medeocre at best.

The biasing in opamps is typically never Class A due to power consumption considerations (more important to the vast majority of opamp users not in high end audio). The need for these amps to drive low impedance loads almost always requires them to employ class AB output stages. IMHO these will never sound as good as a WELL DESIGNED pure class A discrete stage. I am not alone in this opinion. Just ask John Curl what he thinks of IC opamps as high end audio devices.

Regarding the swapping of opamps, this may or not be easy or possible. Firstly, the opamps in the CA products are surface mounted. R/R these amps requires special desoldering equipment to keep from destroying the pc board. They are not mounted in the familiar 8 pin DIP sockets or packages. Secondly, replacing a lower bandwidth IC like the 2132/4 with a very high speed version like the 627 may create severe oscillation problems due to the very high bandwidth of the 627. The bypassing and power supply layout suitable for a 2132 may not prevent oscillation if a 627 is used in its place. So be careful of mods that might look good on paper but be a dissaster in practice.

And, just because a circuit is discrete does not make it necessarily superior to an opamp. I am refering to the Burson "discrete" opamps which have been measured and found to have significant distortion. Much worse than even the 2134 and particularly inferior to the 627/637 series.