Another Next Best Tweak

I tried them on my DIY Ground Control cables. They work good there. But I did notice that having the magnets away from the DIY Ground Control connectors at least 1 inch but no more the 2 inches makes a big difference in bang or bust in sound. So you may have to slowly (tweak) move the magnets towards the connector to lock in the best sound.

Ozzy,
I just put 8 neodymium magnets as a single rod about 3" under my power conditioner. They are super strong. Each one is 1" x 1" x 1/2" square. The effect is stunning. I will be doing a lot more experimenting in the coming weeks using these strong magnets.

Sabai, Are your magnets polarized on the ends?
If so, with the magnets under the Powercell do the magnets attract to the Powercell or just sit under it?
Please explain with more details.
Thanks.

Ozzy,
I have the PowerCell in series with a Bybee Stealth. Everything is plugged into the Bybee -- except the MPCs. I bottom load all my components. They sit on 3" high Tupperware-styled containers filled with dry beach sand. The block of neodymium magnets (bought off Amazon -- I am sure they are polarized) is directly under the right side of the Bybee about 3" below the chassis so it will not cling to the chassis. If you bring a block of these magnets close to any component they will immediately stick to the chassis and you will not be able to get them off.

Can you explain whats going on with the magnets? Where to buy them, where to place them? can you also tell me more about the windchimes? where to place them? wood / metal windchimes? and whats going on there, with the windchimes. any other room treatment advise would be greatly appreciated!! thanks!