Building a Power Strip, any advise?

Hi, Ozzy.

I picked up the Carbon Fiber peel and stick at a auto store back in 2009, looking for something else. I don't remember which auto shop I bought it from. But I don't think it should be hard to find.

Well I made my first power strip.
This first one is only a 4 outlet.
I have in it the Synergistic Tesla SE outlet and the original Synergistic Tesla outlet version along with a Furutech IEC Inlet.

The chassis that I'm using came straight from China and is made out of very thick 1/2" aluminum with feet.
The finished 4 outlet strip was put on my Cable Cooker and will probably cook until late Sunday.

Next up is to make a 8 outlet chassis made out of the same thick Aluminum and with the Furutech IEC inlet.
But, in this strip I will be using Oyaide R1, Maestro, Audience Hospital grade cyroed and a Hubble 5362 cryoed outlets.

I have the Oyaide and Maestro outlets already cooking on my Cable Cooker. From what I have read the Oyaide takes a very long time to break in.

So, I will give that outlet about 9 days total on the cooker and then recook the whole finished product for a few more days.

ozzy, can you comment on where you got the box? feel free to email me at ryancoleman at yahoo.com. mahalo

See if the link below helps. If so scroll down the page.
There are a lot of other great items to buy from on this site.

http://www.vt4c.com/shop/program/main.php?cat_id=1038&group_id=2&hit_cat=

Clickable link, takes about 5 seconds to do,very handy, see markup tags instructions.

http://www.vt4c.com/shop/program/main.php?cat_id=1038&group_id=2&hit_cat=