2. tech-talk
  3. 1365201913

Audio Aero Prima 24-bit/192kHz Should I fix it?

I just acquired a Audio Aero Prima CD Player. It uses a Philips CDM12 transport and a 24-bit/192kHz Burr-Brown chip-set. It skips badly. I opened it up and everything looks really clean. There have been some mods:

There is a 3 lead ribbon that runs from the PC bord on the transport and delivers the digital out signal to the digital out section of the main PC board. The connector was removed from the transport end and was soldered directly to the mating connector pins. Then one of the wires was snipped.

The skipping does not seem to be affected by this mod. It behaves the same when using the digital out as when using the audio out with this ribbon disconnected.

I removed the PC board from the transport and it looks like 2 each IC chips have been removed and a wire soldered to jumper from a pin on one to a pin on the other. This can't be good! Does this mod sound familiar to anyone?

I've been thinking of replacing the transport. It is my understanding that a Philips VAM1252 is a direct replacement for the CDM12.

I looked on Ebay and there are several VAM1252 transports for sale. They all seem to be in the $17.00 to $30.00 range and come from sellers in China.

Is it safe to buy from these sources? Does anyone have any experience to share?
kleppermaster
kleppermaster OP
6 posts
 
Dick,

I tried Lubing the slides. No luck.

I contacted Audio Aero and surprise, I got a response! This is what they said:

"Hello

Unfortunately the problem with the Prima range came with the cd drive. First we used Philips and after Philips /orbit decks, but the parts are no longer available because the provider is out of business since 5 or 6 years...and Philips has stopped the production and after sale service .

I am sorry but we don't have any solution to resolve it.

Bruno GINARD"

I replied and asked if the Prima I have used the Philips CDP12 transport, If the Philips and orbit transports are interchangeable & how do I tell which one I have.

If it is a CDP12 or an interchangeable orbit, the Philips VAM1252 should work. There are several on Ebay.
kleppermaster OP
6 posts
 
OK, here is the latest: I scouted around and found a tag on the back of the CD transport that reads:
3103 308 52010
ECO SL MK3
KT000106168847

I tried searching orbit ECOSL MK-3 and found a few Philips hits. I was able to down load a Philips MX-5 service manual that has my transport in it. It looks like it's a Philips VAM1201 Transport. I wonder if all the VAM12** transports are interchangeable? More research to come.

Jim
djohnson54
396 posts
 
Jim, Sorry it didn't work out. Best of luck on the search. That is a pretty well-respected player. Dick
jafant's avatar
jafant
19,742 posts
 
Many Thanks! Jim.
Keep us posted.
More to discover