Thanks, WWshull - great tip. PBN Audio appears to be very high end. With all the money I save by purchasing the WMB54G instead of a $2K DAC, I might be able to afford a large portion of the shipping charge for one of those speakers (actually, the prices aren't listed so they actually be within the stratosphere). Speakers are way down the line from the PC connection. PBN definitely looks like something to aspire to, though. My next task is to find a cheap/decent receiver that will connect to the WMB54G and not filter the sound too much. Also need two amps: (1) one to power a pair of totem hawks (simaudio perhaps); and (2) a cheap one to power 8 other inferior speakers. But I digress. Word: WMB54G.
Help....I have a blank slate and am flying blind
I am not an audiophile and am trying to get my arms around the whole thing - quickly. The water is deep. I've never had a nice system and am buying a new house. At the expense of all furniture, I want to rig the place for sound to the chagrin of my wife (who hopefully will not discover this post) and 4 kids (though the kids may well opt for music over furniture):
I basically want the system to be PC driven, but also have a couple of components that I would like to include (Teac H500 CD recorder/player and XM receiver). I have at least 4 rooms to rig and am shooting for low to mid-level audiophile grade.
I am thinking of setting the system up something like this: (but am missing a few pieces, which is where I need guidance):
750 GB external hard drive (just purchase new) --> P4 laptop computer (just puchased used) --> DAC (perhaps HAGUSB and/or something else --> cheap/decent receiver (need to purchase or perhaps a pre-amp with A and B channels):
A channel (for room 1) --> good amp (need to purchase - perhaps simaudio i-3) --> totem hawk speakers (just puchased);
B channel (for 3 other rooms) --> cheap amp (need to purchase) --> russound 10 speaker selector (just purchased) --> 8 inferior speakers in 3 different rooms (have them);
The critical threshold at this point is PC to receiver or pre-amp. I use iTunes and have a ton of music in Apple Lossless format, so compatability is an issue I think. My sense is to avoid a wireless connection and soundcards (I've heard they are inferior), so I think I need some sort of DAC, which is where I get off the bus.
I was looking at a HAGUSB (Hagerman Technologies - under $100.00) and a squeezebox ($299 model). The thing I don't like about the squeezebox is it appears that I would have to control it through their box and not through the PC/iTunes. If possible, I'd like to simply use the laptop as the the control center with iTunes as the interface (if that is the right word). I'd rather not spend more than a few hundred dollars on a DAC (I still have to purchase two amps, a receiver or pre-amp, wire, connectors, protectors, rack, etc.)
The second (less critical) threshold is choice between a receiver and a pre-amp. I suppose I could buy a cheap but decent receiver with an A/B channel, but I don't think I want the music filtered through a receiver. Is there a pre-amp with an A/B selector that I could raise the roof by selecting both A and B? This may affect the DAC connection decision from the PC. I have a couple of other components I want to include (CD player and XM receiver) so maybe I have no choice but a receiver - maybe I just answered my own question. You can see I am processing.
Long way to the short question: What is the best way to get from the PC (via usb?) to a receiver or pre-amp in a way that is both compatible with iTunes and would be considered "acceptable" from an audiophile standpoint at a reasonable cost (under $400.00)?
Any assistance is appreciated. Please respond in crayon and do not use "big" words.
I basically want the system to be PC driven, but also have a couple of components that I would like to include (Teac H500 CD recorder/player and XM receiver). I have at least 4 rooms to rig and am shooting for low to mid-level audiophile grade.
I am thinking of setting the system up something like this: (but am missing a few pieces, which is where I need guidance):
750 GB external hard drive (just purchase new) --> P4 laptop computer (just puchased used) --> DAC (perhaps HAGUSB and/or something else --> cheap/decent receiver (need to purchase or perhaps a pre-amp with A and B channels):
A channel (for room 1) --> good amp (need to purchase - perhaps simaudio i-3) --> totem hawk speakers (just puchased);
B channel (for 3 other rooms) --> cheap amp (need to purchase) --> russound 10 speaker selector (just purchased) --> 8 inferior speakers in 3 different rooms (have them);
The critical threshold at this point is PC to receiver or pre-amp. I use iTunes and have a ton of music in Apple Lossless format, so compatability is an issue I think. My sense is to avoid a wireless connection and soundcards (I've heard they are inferior), so I think I need some sort of DAC, which is where I get off the bus.
I was looking at a HAGUSB (Hagerman Technologies - under $100.00) and a squeezebox ($299 model). The thing I don't like about the squeezebox is it appears that I would have to control it through their box and not through the PC/iTunes. If possible, I'd like to simply use the laptop as the the control center with iTunes as the interface (if that is the right word). I'd rather not spend more than a few hundred dollars on a DAC (I still have to purchase two amps, a receiver or pre-amp, wire, connectors, protectors, rack, etc.)
The second (less critical) threshold is choice between a receiver and a pre-amp. I suppose I could buy a cheap but decent receiver with an A/B channel, but I don't think I want the music filtered through a receiver. Is there a pre-amp with an A/B selector that I could raise the roof by selecting both A and B? This may affect the DAC connection decision from the PC. I have a couple of other components I want to include (CD player and XM receiver) so maybe I have no choice but a receiver - maybe I just answered my own question. You can see I am processing.
Long way to the short question: What is the best way to get from the PC (via usb?) to a receiver or pre-amp in a way that is both compatible with iTunes and would be considered "acceptable" from an audiophile standpoint at a reasonable cost (under $400.00)?
Any assistance is appreciated. Please respond in crayon and do not use "big" words.
- ...
- 24 posts total
- 24 posts total