Window Treatments to Remove reflected sound


I have a listening room with hard wood floors, two French doors beside one speaker, two more across the room and two walls full of windows. Any thoughts on the best window treatment to improve sound? I'm assuming metal blinds are just as bad as the glass and am considering cellular blinds, which seem to be made of polysester but have an air pocket in the middle. Any experience on what works best? Thanks for the input
ruhl
Post removed 
This is not necessarily the "best" accoustic solution, but it does have some advantages. Behind the listening position in my rental apartment is a standard two-panel sliding glass door that leads to a balcony. The landlord furnishes apartment-grade, hard plastic vertical blinds, each blind being about 4" wide. I simply set the blinds at a 45 degree angle to the room. In theory, sound waves hitting the slanted blinds will reflect at various angles, depending upon the angle of attack. A few will bounce back into the room, but most will reflect into adjoining blinds or to the glass behind and then reflect into the back side of the other blinds.

Does it work? Aside from the sliding glass doors, my room leans toward the bright side, but I don't experience any noticeable listener fatigue, muddy textures, compressed soundstage or confused imaging.

One advantage of slanting blinds, as opposed to draperies or shades, is that you don't have to banish sunlight during daytime listening. Of course, slanted blinds will work even better when they are made of wood or are covered with fabric. And if outside noise is also a concern, thick draperies or black-out shades would be preferable.
No set blinds will have any effect below mid-frequencies and exactly where they will change from dispersing the audio to reflecting it is somewhat unpredictable. The glass is transparent to bass and reflective of HF so, in order to have a nearly equal effect across the spectrum, you need some heavy absorbtion from the low midrange up. I've used velvet drapes interlined with dacron acoustic batting. Since the coverage is adjustable, you can titrate the effect you want.

Kal
Thanks for the good input. What exactly do tuning dots do? There is no explanation of them on the web sit referenced.
Post removed