joelz
Responses from joelz
| Need Processor Input Robert, my local audio store and a few folks on the internet (avsforum) are the ones I took advice from and think the BDP-09FD (analog out) + Classe SSP600 has very good sound as the 09FD is an audiophile grade player and the Classe is still fanta... | |
| Need Processor Input I'm confused on what your asking and what a CBI is. However, I do have an old processor and a new bluray player (Pioneer Elite BDP-09FD). I use analog out from the 09FD into my classe ssp-600.Then the classe goes to my McIntosh C500t pre-amp in ho... | |
| integrating HT with 2 channel I have the HT and 2 channel setup. The way it works is your HT processor's line level outs for left and right go to the pre-amp. Your CD player/DAC/whatever also goes to the pre-amp. Then your pre-amp connects to your monoblocks (or whatever amp) ... | |
| Am I limiting current to my amps and sub? Very interesting responses!I'm still at a loss though. What do I plug my equipment into if I have only 2 outlets (4 plug ins) to the wall? Can't use powerstrips, the line conditioners I have are no good and the A/c regenerators are out of my budge... | |
| what do you use to remove your tubes? I don't care who you are, that right there was funny! (post from Phaelon) | |
| McIntosh MC-501 vs McIntosh MC-1.2KW A few things to consider that haven't been mentioned 1) room size 2) available A/C powerAside from that and as an McIntosh customer, my room is 13' X 17' with MC501's and Sophia II's. That is enough for me, it took a while to come to this point (t... | |
| Audio from Blu-Ray players-how is it? I have experience with the Pioneer BDP-09FD, one of the best "Audiophile" grade Blue-Ray players at this time.This unit in conjunction with the Audio Research DAC7 sounds awesome, killer sound stage (deep, wide), great imaging and low noise floor.... | |
| Marantz reliability? Marantz in my experience is not reliable.SR-18EX reciever - video switching broke right after the warranty expiredDV9500 Universal disk player - quit playing disks (wont load disks) right after the warranty expired.They make good sound, but do not... | |
| What amps for B&W 804 and HTM2? I've used the Rotel 1095 (1KW 5 ch.) and McIntosh mononblocks (MC501) with the HTM2d.My Marantz reciever had more imaging and soundstage compared to the Rotel with some MK bookshelfs. That doesn't say much for the Rotel amp.I now use the Rotel amp... | |
| Paradigm Sig Servo 15" and Velodyne SMS-1 Thanks for the detailed information, Marty!So if I skipped using the sub for 2 channel, the SMS-1 unit would do me well for home theater/TV?Joel |