2. amps-preamps
  3. 189266-181

$100-200 linear power supply

Trying to remove the digital glare from my Fosi Audio TDA7498E amp. Would changing to a linear power supply do the trick? Speakers are similar to Devore O/baby and Micr/O and listen at 70-80dB max.

Open to any suggestions. Would any of these be suitable?

 

25W 12V Regulated Linear Power Supply

I like this because it uses FRED’s but only 2 amps at 12VDC.

 

5A Output Regulated Voltage Linear Power Supply 50VA Transformer

 

Finished 50W Ultra-low Noise Linear Power Supply

cdc
bigshutterbug
383 posts
 

Pick up an Astron RS12A 12V  power supply off E-Bay for well under $100 including shipping. Over 10 amps of current, American made, built to last for many decades. They sound fantastic, and better than many "audiophile grade" power supplies I have tried priced in the $400-$800 range. You won't regret it. 

mahgister's avatar
mahgister
13,098 posts
 

I will also use a linear power supply ...

but i will ad this :

Put a thin  plate of shungite with a copper tape  on the Fosi and/or  on the linear supply ... Add a piece of quartz if it compress the sound a bit too much...

it is my homemade creation...

I dont buy tweaks but make my own ... 😊

 

jackd
1,068 posts
 

If you don't buy the size LPS that is specified by the amp maker you are wasting money.  In your case that's 24 volts and 4.5 amps.  Only one of the three you linked met that standard. 

cdc OP
1,798 posts
 

In your case that's 24 volts and 4.5 amps.

That is a good point.

cdc OP
1,798 posts
 
Put a thin  plate of shungite with a copper tape  on the Fosi
 
There are five types of shungite rocks, categorized by their carbon content:
  • Shungite-1 (noble elite shungite): 90%-98% carbon; this has the metallic sheen.
  • Shungite-2 (raw shungite): 35%-80% carbon.
  • Shungite-3: 20%-35% carbon.
  • Shungite-4: 10%-20% carbon.
  • Shungite-5: Less than 10% carbon.
More to discover