Acoustat repair or rebuild in Texas???

Samujohn,

Thanks for the reply! I can see something with a flashlight
from the back at that exact spot that looks like
something pulling away from that vertical strip, but cannot
tell exactly whats going on. I guess I will have to
unbolt the transformers to get the socks off??
Also, I know the panels are charged, any idea of how to
discharge them?? (maybe stick my tongue on them?? :o)
or wait for a period?

Thanks again!

Unplug the speakers and allow them to discharge for 24 hours before you touch anything that might be part of the circuit. High voltage can kill you!!!!
You can take the metal plate off the top of the speaker (not the base where the power supply is but the actual top of the 7.5 ft. speaker) by removing the eight or ten screws. Then use a thin screwdriver to pry off the staples which hold the cloth to the wood. Then roll the fabric down as you would a sock being careful to keep your fingers out of the electrical works. Carefully compare the two speakers to see what may be amiss. You may Email me at samujohn@bellsouth.net if you want to have further instructions, but this should get you started.

Did you solve your problem yet? Freeman Tuell in Dallas, 214.324.1132 would be my place to start. Good Luck.

You also need to look for flaking glue. I had a pair years ago and the fix for the buzz was to remove the socks and blow out the area.

they have a great reputation 
https://www.facebook.com/pages/Freeman-Tuell-Speaker-Repair-Service/163512963667608
pls let me kno how this works ?
Bill LeBus
732-539-7857