Advice and recommendations needed for a turntable rig...

I have an older Technics 1200 and the PLX1000 is at least as good in all aspects!

Before you buy anything, make sure you have a stable place to put it. I suggest placing half a glass of water in the intended spot and walk around. If the water wobbles, you will have an issue. Been there and it’s not fun to get your new table home only to have the arm skitter across the record if you look at it the wrong way. As far as what you buy, I really think you should consider it an experiment to see if you really want to stick with vinyl. Any of the regular players are fine. technics, project, whatever. Then in a year or 2, if you want to stay with it, you’ll have a lot more experience from which to choose an upgrade if you like. 

From my personal experience. Had MMF-5, my understanding Music Hall is sister company of Pro-ject using the same components, and was not impressed to say the least. Moved to Marantz TT15S2,by Clearaudio, very significant upgrade. Went through several phono stages and settled on QHW Vinyl, see review by M. Framer. Currently having Hana ML, overall I am very satisfied and settled in with this set up for a while, I think.

Are you sure you will stick with Vinyl?

If not, it is my advice to start modestly, see if you stick with it, then move up.

Audio Technica AT-120 turntable is a great start, it now comes with their AT-VM95e cartridge (elliptical stylus). MM Interchangeable Stylus: You can upgrade the stylus (6 variations fit it). The cartridge body stays factory aligned, an advantage when starting out.

Certainly not excellent sound, but certainly enough to see if you stick with the 'hands on' Vinyl world.

Direct Drive

Internal optional Phono EQ gets you started with no additional expense (my AT-120’s optional eq sounded better to me than my McIntosh C28’s phono).

Removable headshell allows trying better cartridge in the future, then those headshell/cartridges can be used on a future arm, so that investment is transferrable as you move up.

You mentioned this is for ONE of your systems. Therefore, if you stick with vinyl, you could use the starter TT in a less important system or give it away, or sell it.

AT has an outlet store, certified .... even easier to start, find out if you will stick with it.

That Pioneer table looks like a great way to go.  A 32# table for $700!  Looks like a bargain.  I have the Project X2 in a headphone based system.  It's a beautiful table to be sure with a nice tonearm.  I'm very pleased with it.  But that Pioneer looks very interesting.