I have only comments, not specific recommendations:
I had and sold McIntosh SS Amp: MC2250 and SS Preamp C28. Frankly, except bulletproof, nothing special, just ’do no harm’. I (and everyone else) preferred my tube equipment.
I have my first and only Luxman, a tube integrated 10 wpc in my office. I love it, would definitely choose it over McIntosh, but it’s not indicative of the SS unit you are choosing.
Optional Speakers:
I ran 3 amps to 1 pair of speakers, each had WBT Locking Banana Plugs; 3 sets of speakers is simply the reverse. That lets you buy any amp without dual speaker capacity, much wider choices, perhaps larger transformers, ... I put a hook on the wall I could easily reach to hang the banana joints
Idle Speakers: Woofer and Mid Cones of Idle Speakers in the same room can make unwanted vibrations, thus you will need to think that thru, mobility, covers, ...?
Phono:
MM and/or MC: It’s hard to find one you truly like. For MC, these only have single loads, no optional X Factors or Optional Loads, i.e. Luxman is fairly common .3mv/100 ohms. You can select a cartridge to fit that, but I highly recommend just an MM Phono Input, and see if you like it first. Then for MC, a SUT with optional loading will let you use that desirable MM Phono EQ for various MC Cartridges. IF you don’t like the Phono, then you have the option of a separate MM/MC Phono Stage in all cases, IOW, don’t let the lack of MC capability be a concern (I know you want compact, but ...)
I did NOT like my McIntosh SS C28 Preamp’s MM Phono sound, just to reinforce that you may not like the built in MM of any chosen integrated, I would research that thoroughly. Of course you can always use a spare line-in later. Options widen again if Phono is separate.
Remotes/Menu Access/Remote Balance:
McIntosh doesn’t show the remote, I have found in the past I needed to download and read the full manual to ascertain facts. It may have access to it’s menu, perhaps allowing remote balance which, if/when you have a system with excellent imaging, will let you get large improvements with small balance adjustments for individual tracks. Once you have remote balance, you will never live without it.
Luxman and Yamaha remotes do not have a menu button, or remote balance.
Meter Options: the Yamaha has optional settings for the meters, just mentioning it.
best of luck with your decisions,
Elliott
I had and sold McIntosh SS Amp: MC2250 and SS Preamp C28. Frankly, except bulletproof, nothing special, just ’do no harm’. I (and everyone else) preferred my tube equipment.
I have my first and only Luxman, a tube integrated 10 wpc in my office. I love it, would definitely choose it over McIntosh, but it’s not indicative of the SS unit you are choosing.
Optional Speakers:
I ran 3 amps to 1 pair of speakers, each had WBT Locking Banana Plugs; 3 sets of speakers is simply the reverse. That lets you buy any amp without dual speaker capacity, much wider choices, perhaps larger transformers, ... I put a hook on the wall I could easily reach to hang the banana joints
Idle Speakers: Woofer and Mid Cones of Idle Speakers in the same room can make unwanted vibrations, thus you will need to think that thru, mobility, covers, ...?
Phono:
MM and/or MC: It’s hard to find one you truly like. For MC, these only have single loads, no optional X Factors or Optional Loads, i.e. Luxman is fairly common .3mv/100 ohms. You can select a cartridge to fit that, but I highly recommend just an MM Phono Input, and see if you like it first. Then for MC, a SUT with optional loading will let you use that desirable MM Phono EQ for various MC Cartridges. IF you don’t like the Phono, then you have the option of a separate MM/MC Phono Stage in all cases, IOW, don’t let the lack of MC capability be a concern (I know you want compact, but ...)
I did NOT like my McIntosh SS C28 Preamp’s MM Phono sound, just to reinforce that you may not like the built in MM of any chosen integrated, I would research that thoroughly. Of course you can always use a spare line-in later. Options widen again if Phono is separate.
Remotes/Menu Access/Remote Balance:
McIntosh doesn’t show the remote, I have found in the past I needed to download and read the full manual to ascertain facts. It may have access to it’s menu, perhaps allowing remote balance which, if/when you have a system with excellent imaging, will let you get large improvements with small balance adjustments for individual tracks. Once you have remote balance, you will never live without it.
Luxman and Yamaha remotes do not have a menu button, or remote balance.
Meter Options: the Yamaha has optional settings for the meters, just mentioning it.
best of luck with your decisions,
Elliott
