Ancient Cable Experts Please Help.

Hi Audiozpf, I won't comment on how they sounded new, since you say you liked them, but I recently helped someone put a new system together and they had some of the speaker cable you refer to in their old system. When we listened to it in the new one the sound was not only poor but quite distorted - I presume because the copper conductors had oxidised badly. This is perhaps the most important reason why you should listen to some new cables, but I also reckon you will get much better resloution with a more modern cable anyway.

I concur with Redkiwi about the possible conductor oxidization. (Now the part where the ANCIENT CABLE EXPERT part of your post applies!) My own experience with some of the early Monster speaker cables is that the oxidization can be limited to a few inches near the terminations and a quick remedy is to cut-back and re-terminate if you want to continue using these cables (??). But agree that you should try and listen to some more modern cable. Have fun! Richard at www.vantageaudio.com

Richard's and Redkiwi's thoughts are the same as mine. I had the old M-1000 interconnect, and after a few years the sound had degraded because of breakdown in the solder they used and oxidation in that area. This problem may have been limited to the earlier runs of the interconnect, as I recall reading something about that in Stereophile years ago. You could reterminate, probably, but while not all new cable designs are necessarily improvements, I think there are a good number of substantially better cables out there now, and your preamp will definitely let you hear the differences. Ultimately, let your ears be the judge.