Bel Canto S300 driving Gallo 3.1s

Everest,

Who knew?
Bel Canto told me to leave 'em powered on (said there is virtually no wear or power drain) and never mentioned the fixed level option.

Thanks.

Marty

Ukthunderace,

Sounds like the output from your Transporter set at full is still less than the BC wants to see.

Something doesn't sound right. Try a different amp and see what happens. The Gallos may or may not pressurize your room, but they should be very loud with the Bel Canto at near maximum volume.

Okay, with the front display reading 95 on a good FLAC (Breathe-Pink Floyd) it sounds very good and is loud...very loud. I am just thinking I shouldn't have to turn it up that far to get the sound...no overhead you see?
My 100W Marshall guitar amp only gets turned up about halfway before it is just too loud...LOADS of overhead.
I don't think the Gallos are really that hard to drive, are they?

Uk,

My original point was that the volume (or decreasing attenuation) control on the BC amp seems to be a fair bit more "back ended" than other amps I've encountered. I end up with high 80s when listening at normal volume levels - but I don't hear anything that concerns me when I go up from there for those all important "head banging" sessions.

The actual position of the knob isn't necessarily indicative of where you sit relative to full output - it's a variation on the old "it goes to 11" joke from Spinal Tap. Give BC a shout if you're concerned (they're very nice folks), but I don't think it's much of an issue.

Marty

Something's not right there- and it's not the S300. You sure about that?