2. tech-talk
  3. 973042977

Cable TV causing system ground problems!

After responding to another thread about powerline products. ..I wanted to post what you might call a warning...or at least a "heads-up". Cable feeds...be they for TV or cable internet..or FM, can cause real problems for your stereo. The ground on cable can have DC and other problems..that if connected to your system through interconnects from unit to unit, or to the AC can cause you to go searching for a cure. The real cure is to keep cable feeds out of your system and your systems AC.
whatjd
sfbaydude
109 posts
 
Whatjd, Thanks as always.
arcmania's avatar
arcmania
39 posts
 
Sometimes you get a ground loop when you have a dedicated ground for your system and your 75 ohm antenna or cable is attached to another ground. The easiest and cheapest thing to do is to get two 75 ohm to 300 ohm comverters and attach them back to back, use a voltmeter to test the continuity of the threaded shield, if it breaks the continuity you will eliminate the ground difference, which can be either a big or a small improvement depending on your particular ground problem.
kurt_s
10 posts
 
I recently solved the problem with a $12 Holland Electronic ground loop isolator from a local A/V shop. Solved the problem. A friend of mine suggested a homemade 75-300-75ohm resister series to do the same thing (see post above). I still kick myself for not visiting Radio Shack and saving $4 bucks. I could almost by a used CD. Have fun! Kurt
More to discover