Undertow,
Thank you for your reply and for the offer of your North Creek inductors. I have not measured the values of the inductors in the crossover yet, but I will certainly keep yours in mind if it looks like they will work.
I read your posts on this thread and found them very helpful, especially with regard to the Clarity MR caps. I may just go with all Clarity MR. However, I also read your comments about the combination of caps and was wondering if you would please give me your take on the below options. I haven't confirmed the crossover topology yet, but I am assuming the 15micF is associated with the midrange and the 4.7micF with the tweeter. The ratio of capacitor values were based on what was available on PartsConnexion:
1. midrange: 15micF Clarity MR
tweeter 4.7micF Clarity MR
2. midrange: 12micF Clarity MR + 3micF Duelund VSF
tweeter 4.7micF Duelund VSF
3. midrange: 12micF Clarity MR + 2 x 1.5micF Mundorf S/O
tweeter 4.7micF Clarity MR
Also, with regard to the inductors, if I do use an 8awg on the woofer, would it be advisable to use an 8awg for the midrange for consistency, or back off to 12awg, etc?
And finally, does the increase in gauge of the inductor increase the intensity, say of the bass, or does it just speed things up?
Thanks again for your help,
John
Thank you for your reply and for the offer of your North Creek inductors. I have not measured the values of the inductors in the crossover yet, but I will certainly keep yours in mind if it looks like they will work.
I read your posts on this thread and found them very helpful, especially with regard to the Clarity MR caps. I may just go with all Clarity MR. However, I also read your comments about the combination of caps and was wondering if you would please give me your take on the below options. I haven't confirmed the crossover topology yet, but I am assuming the 15micF is associated with the midrange and the 4.7micF with the tweeter. The ratio of capacitor values were based on what was available on PartsConnexion:
1. midrange: 15micF Clarity MR
tweeter 4.7micF Clarity MR
2. midrange: 12micF Clarity MR + 3micF Duelund VSF
tweeter 4.7micF Duelund VSF
3. midrange: 12micF Clarity MR + 2 x 1.5micF Mundorf S/O
tweeter 4.7micF Clarity MR
Also, with regard to the inductors, if I do use an 8awg on the woofer, would it be advisable to use an 8awg for the midrange for consistency, or back off to 12awg, etc?
And finally, does the increase in gauge of the inductor increase the intensity, say of the bass, or does it just speed things up?
Thanks again for your help,
John