Salectric,
Your points are well taken, and your advice always appreciated I might add. Like Charles I too originally changed from Solen capacitors. In one set of speakers the path was Solen -> Mundorf Silver/Gold/Oil -> Duelund VSF Copper. In my present speakers the path was Solen -> Clarity MR -> Duelund CAST Copper.
My decision to go to Duelund CAST was based on my experience with those earlier caps, from reading selected posts on this thread from those who expressed similar opinions of those caps, and from their subsequent opinions of the Duelund CAST. My goal was to combine the attributes of the Duelund VSF (tone, richness, harmonic structure, naturalness) with that of the Clarity MR (speed, very low noise floor, spacial retrieval). In my system I achieved those goals to my satisfaction with the Duelund CAST capacitors and am quite happy, and as I mentioned in my previous post, am therefore not inclined experiment further. I'm just enjoying listening to my system.
Thanks again for your reply to my earlier post about the capacitor values for my current crossover project. I was able to determine that the 3.3uF with 0.22uF bypass capacitor was indeed the original configuration. Just to be safe, I'm going to order the new caps in a 3.52uF value. As you mentioned the difference between the 3.3uF and 3.52uF values would likely be inconsequential in the speaker's first order crossover, I'm more comfortable staying with the designer's original values and since the CAST caps are made to order it's just as easy to order a 3.52 as it would be to order a 3.3.
Best wishes,
John
Your points are well taken, and your advice always appreciated I might add. Like Charles I too originally changed from Solen capacitors. In one set of speakers the path was Solen -> Mundorf Silver/Gold/Oil -> Duelund VSF Copper. In my present speakers the path was Solen -> Clarity MR -> Duelund CAST Copper.
My decision to go to Duelund CAST was based on my experience with those earlier caps, from reading selected posts on this thread from those who expressed similar opinions of those caps, and from their subsequent opinions of the Duelund CAST. My goal was to combine the attributes of the Duelund VSF (tone, richness, harmonic structure, naturalness) with that of the Clarity MR (speed, very low noise floor, spacial retrieval). In my system I achieved those goals to my satisfaction with the Duelund CAST capacitors and am quite happy, and as I mentioned in my previous post, am therefore not inclined experiment further. I'm just enjoying listening to my system.
Thanks again for your reply to my earlier post about the capacitor values for my current crossover project. I was able to determine that the 3.3uF with 0.22uF bypass capacitor was indeed the original configuration. Just to be safe, I'm going to order the new caps in a 3.52uF value. As you mentioned the difference between the 3.3uF and 3.52uF values would likely be inconsequential in the speaker's first order crossover, I'm more comfortable staying with the designer's original values and since the CAST caps are made to order it's just as easy to order a 3.52 as it would be to order a 3.3.
Best wishes,
John