2. analog
  3. 1128595859

Cartridge Recommendation

Hi folks. I'm helping a friend put together a two-channel system and could use some help on a cartridge recommendation. He has my old Systemdeck II with a Rega RB300 arm. Preamp will be an ARC SP16. Speakers are Proac D25s. When I owned the table, I think I ran a Garrott P77 which worked pretty well--but that was at least 10 years ago! I'd appreciate hearing particularly with those of you who have experience with the RB300 in a sprung suspension design. I'm considering Dynavector 10X5, Goldring Eroica, Garrott P77, Audiotechnica. I'm sure there are others that I'm missing. Thanks for the help.
128x128dodgealum
16 responses Add your response
afro18
51 posts
 
I'd push towards either a Goldring Eroica H or a Denon 160. The Denon is better and natural. The Eroica is a bit warmer and 'lush/romantic' sounding. Grado Ref Platinum is always an option but it's colder.

If you really want the best, goto Audiocubes.com. Spend $200 on a Denon 103 and $100 on the step-up tranny. With that tranny, you can plug the Denon into a standard MM input and it work.

Until you hear a Denon, you don't know what good sound is (I Love My 301 II).

Marty Nickison
stevecham
3,340 posts
 
Benz micro Glider is a good choice for that arm as well.
riley1
7 posts
 
I believe an akiva would prove very rewarding on the systemdek, budget permitting. The dek is a clasic beuty!
unnamed00
7 posts
 
all are firm choices-HOwever-the ortofon super om 30 mm at 159.00 is wonderful at tracking and great with nearfield resolution.
stefanl
296 posts
 
Stan,To "Riot" was the first move you had to make semantically,in your move at me when you decided that I was an "audio nong" you just had to diss.I have been a riot for most of my life.P.S I saw ya!
stanhifi
224 posts
 
>>you probably are aware of the ins and outs here<<

I can't stop laughing. You're a riot!!!
stefanl
296 posts
 
Stan,There is a difference between a high output moving coil and low output moving coil cartridge as you probably know.The low ouput and required loading makes the Denon perhaps a little fussy.. the phono stage you use can be problematic.I think the Dynavector is trying to masquerade as a moving magnet type cartridge.Now you could probably plug that straight into the phono stage,but then you probably are aware of the ins and outs here.
seandtaylor99
1,262 posts
 
By all accounts the Goldring 1042 MM is better than the MC Eroica, and cheaper.
stanhifi
224 posts
 
>>There is the Denon 103 cheaper and most likely better than a Dynavector 10x5,it is a moving coil though.<<

So is the Dynavector.
stefanl
296 posts
 
There is the Denon 103 cheaper and most likely better than a Dynavector 10x5,it is a moving coil though.
slate1
82 posts
 
The 10x5 is a fantastic match to the Rega arm and, by far, would be my pick on that table. I'm running a 20xL and think it's the finest cartridge I've run under $1k - hell, it may be the finest all around cart I've ever run! You can't go wrong with any Dynavector on a Rega or VPI arm in my experience.
dodgealum's avatar
dodgealum OP
1,404 posts
 
I'm using a 20XH in my Scout and think it is fantastic. In that setup the Dyna excels. I'm wondering how the 10X5 will mate with the Rega. Can anyone comment? Thanks
dopogue
1,773 posts
 
I have a Dyna 10X5 for sale here on Audiogon if anyone's interested. Dave
robm321
932 posts
 
I did the exact same thing as Dupzyk. I would use Dynavector unless you are willing to spend over $1k. The 10x5 is great.
dupzyk
29 posts
 
I changed from the goldring to the dynavector 10x5 on a music hall 7 table that I used to own -- I thought the change to the dynavector was a significant improvement --REgards, Carol
vvrinc
323 posts
 
Doug, how about a Denon 110 or 160. My son has the 110 on a Denon turntable and the sound is very impressive.

Regards,
Santiago
Log in to respond
More to discover
80x80
Rega P6
80x80
ZYX Ultimate Exceed Airy
80x80
CHOIR AUDIO Turntable with SME 3 tonearm