2. speakers
  3. 1324881171

Center Channel with Vandy Quattros? Need help-

Problem, looking for suggestions and or answers. I am expanding my two channel system for some surround sound applications through video---for audio, I am a dedicated two channel guy---here's the issue--I have a beautiful cabinet that holds most every piece of my equipment, directly below my Plasma screen (CJ Amp, Pre, CD, DVD)---I was hoping to put a center speaker inside this custom cabinet but am limited somewhat to space---I need something in the range of 20-21" in width--in order to get other pieces on either side--otherwise I will have to put center channel on top of this beautiful cabinet--not my preferred choice in keeping it all looking clean---the Vandy VCC 1 fits fine, but I am told that I probably need the VCC 2, to optimize mix with Quattros--this is a wide unit--suggestions? I am really stumped on this one, not having much experience with a center channel---I am told it is always best to stay with speakers from the same manufacturer---should I consider, perhaps a different product?? Any and all helpful suggestions or observations are greatly appreciated.
bluesnbike1954
swampwalker's avatar
swampwalker
5,138 posts
 
My belief has always been that the center should voice match a close as possible to the L and R fronts.

I don't have a need for really high end when I'm watching a movie....the plot/characters, etc. are far more important. I would retain the beautiful look and do the best I could regarding surround.
Exactly. I have no idea whether there is any significant diff btwn the VCC-1 and VCC-2, but cannot imagine that another manufacturer would have a speaker that is voiced more closely to your Quattros (or any other Vandy for that matter) Relax. Enjoy.
bjesien
1,283 posts
 
Jeff, please elaborate on the nut hanging above the VCC-1.
bobmcc
2 posts
 
I have a VCC1 signature that I used on a stand? The system used a Stewart screen not a cabinet. Fabulous center channel. A friend bought one after hearing mine but put it in a cabinet cavity. Didn't like the sound until we filled cavity behind the speaker with sound absorbent material. Then it was crystal clear.

I just moved and had to give up my theater, so the VCC1 sig and a pair of rear L&R VSM1's (signatures also) are going to be sold.

My fronts are Vandy 5's which I'm using in a stereo setup.

If you have an interest contact me.

Bob McCarthy
bluesnbike1954 OP
31 posts
 
Thanks to all for your input-spoke with Richard briefly yesterday--he stated that at a minimum, with the Quatros, the VCC 2 was what he recommended. He did not feel that the VCC 1 was sufficient for these speakers or even his 5A's-----so, I'm going with the 2-----we'll see how this all works out---I know crap about video---but just trying to optimize some video WITH the audio which I'm all about.
bobmcc
2 posts
 
I love Richard, but remember the audio holder rule, 2 is always better than 1.

I can't imagine how. The dialog was always perfect with the 1 sigs..

I guess I missed something. Best of luck, no doubt you'll be very pleased .

Bob
More to discover