converting oiled walnut to "rosenut" color

I have a pair of Snell Type A-III's that I'm freshening up(new woofer foams and maybe some crossover updates).

I'd like to change the existing oiled walnut to a rosenut color. Overall, the walnut veneer on both speakers is in excellent condition and really needs no work. I'm reasonably adept in a woodworking shop and in wood finishing. I'm considering wiping them down with General Finishes Georgian Cherry gel stain. It has the right dark-wine color.

Has anyone done this before? Any suggestions for changing to color to rosenut? How about top finishes?..I don't want to use any heavy topcoats. I'd like them to appear as natural-original as possible. I know the refinish may impact their value, but I'm not too concerned about that.

I think Corazon makes the most sense. Leave them alone. In my opinion if you add veneer over the existing veneer. You run the risk of 1st)ruining the sound quality as the dynamics of the cabinet will change, 2nd)a good chance the top veneer may loosen the original of the glues interact somehow. 3rd) getting a telegraph of the orginial veneer graining through the new layer. 4th) ruining the resale value as you leave the "original" condition behind.
Just my opinion.

Points well taken.

Why change the color?..the room where I listen has a mix of chocolate-brown oriental furniture and a couple pieces of furniture that are dark wine-red in color. The Snells are the odd-man-out with an oiled-walnut color. This is driven purely by aesthetics. If the Snells were would look very nice.

No doubt I might be unhappy with failed results, that's why I'm looking into options. "Rosenut" is just walnut stained with a red mahogany or cherry stain(or more likely dye..fine furniture is often dyed due to greater transparency). So this isn't odd..just converting from one color to another is odd.

One veneer over another and sound quality..yeah..that's a big unknown & if I mess it up, going back won't be so easy. Top veneer glue raising the bottom veneer/glue..surely possible, but in my woodworking experience, unlikely. Any veneer adhesive these days is high solids(low solvent) and the first adhesive is cured to a brick by now. Telegraphing..possible if the base veneer were flat-sawn oak or ash(ugly me), but what's there is a very fine walnut surface. Add adhesive and more veneer and it would be fine. Resale..I know & I don't care. We're not talk significant money here. If they were worth 5-10K on the resale market, then I'd care. The sound appraoches 5-10K..which is why I'm keeping them. All the possible reveneer issues is why I leaned toward restain(dye)initially, that and cost. I'll admit, given everyone's thoughts, I'm reconsidering the entire project.

I would be interested in your(anyone's) thoughts on other speakers that have the Snell's sound signature. I'm aware of Vandys, but not of others, first hand at least.
The new veneer will not damage sound quality it would improve it. The new veneer will not loosen glues thats just crazy to suggest and shows no understand of wood working. You will not see the grain of the old veneer through new again I question the posters experience with any wood working. The last might be true if loudspeakers newer might loss value if re-veneered.

I just refinished a 30 year old pair of walnut JBL's. I used 0000 steel wool on them and then I applied Howard's Retore a Finish. Howard's comes in many different wood colors and I used walnut. They turned out darker and richer looking. Here is a link to some photos. This a miracle product that is so easy to use.
Audiokarma has a lot of guys who've restored/recompense, etc. speakers and cabinets. Someone over there may have done what you're trying to do. I'd search that site and/or start a thread.