Aric Audio Super KT 88 SE
Cool running, low powered power amp
My regular amp is a Class A, all tube (KT 88’s) affair that runs very warm. For most of the year, it doesn’t matter. But in the dog days of summer, it can become unpleasant in my smallish listening room, where the AC doesn’t reach as well.
My speakers are Volti Razz, which are something like 97 db efficient. My big tube amp is out in California getting repaired, and at the moment, the Volti are enjoying time spent with a Scott 299A. Those 17 wpc are plenty (and sound way better than a 65 year-old amp with original tubes (or at least, tubes marked "H.H. Scott") should. Volti says it only needs to be 8 watts to do the job.
I was thinking of First Watt, or maybe Pass Labs XA 25. But both of those are also Class A. But maybe all Class A are not alike in terms of generating heat. I am not anti-class D, and have had two Class D amps that sounded good, but I’d be more interested in A/B, or cooler running Class A. I'd like to bring it in under $3000, and I am a big fan of used equipment.
Thanks,
David
- ...
- 38 posts total
Yes, the Decware waitlist is something to contend with. There is a set of UFO monoblocks on USAM right now just above your budget line. However, the regular UFO's come up about once a month or so for sale. There is also a gorgeous, upgraded Rachel for sale that should do everything you want, as well and it's under your budget. I'd take a serious look at that one. |
I would strongly recommend hearing any amp first before buying. In particular, putting money down for something you have to wait three years for seems very risky. I've heard three Decware amps and all of them were whimpy sounding things that sounded pleasant, but, very limp and unable to deliver punch. The speakers they were used with were high efficiency speakers (about as easy or easier to drive than the Volti Razz). With low heat a big priority, Class D solid state makes sense. Find a high quality lower powered Class D amp. If you are sticking with tubes, the advice above about Audio Note Oto or Soro is good, if you can find something used in your price range. I would not be looking at hot running tube amps such a those employing KT88, KT120, KT150 or KT170. If you have someone to service your amp, you might be able to find something vintage that runs EL84, 6L6 or KT66, and even EL34 (not one of my favorite tube types, but some amps running those tubes sound good). These tube types I've mentioned tend, to my taste, to sound better than the KT88s you run (not as hard or brittle sounding). Good luck in your search. |
+1 @fthompson251 I would talk to Aric of Aric Audio about his tube amps. He makes a couple SET amplifiers. |
@dtorc FWIW, we make a 5-Watt/channel class A tube amplifier that can sit on a sheet of notebook paper with room left over. I designed it for my bedroom system. BTW, something to keep in mind about SETs: if they have no feedback (and most don't), their actual usable power is about 20-25% of their rated power. This is because at power levels above that, the higher ordered harmonics start to show up on musical transients. This causes the amp to sound dynamic (since the ear uses higher ordered harmonics to sense sound pressure) but its really distortion masquerading as 'dynamics' and is the source of why so many people say SETs are a lot more dynamic than their power suggests. |
- 38 posts total