I would think that you should be fine with the current setup. I can't think of any reason why the Vibrapods' effectiveness would be hurt by using marble.
DIY TT platform Marble to Wood Changeover
I have a Basis TT without any suspension. It is wall mounted
using a steel bracket which was originally an amp stand. The shelf is white marble and separated from the rack with rubber strips at the 3 contact points.
The TT is isolated using 3 Clearaudio acrylic cone feet sitting on Vibrapods. This works pretty well but everything I read says marble is a no no for this application. My question is this. Does the marble really play into the sound if it is separated by the Vibrapod/cone feet? I would consider changing the shelf out to a birch board or butcher block. If so do I keep the cones and Vibrapods?
using a steel bracket which was originally an amp stand. The shelf is white marble and separated from the rack with rubber strips at the 3 contact points.
The TT is isolated using 3 Clearaudio acrylic cone feet sitting on Vibrapods. This works pretty well but everything I read says marble is a no no for this application. My question is this. Does the marble really play into the sound if it is separated by the Vibrapod/cone feet? I would consider changing the shelf out to a birch board or butcher block. If so do I keep the cones and Vibrapods?
- ...
- 6 posts total
- 6 posts total