Does soundproofing improve or harm sound?

I am building a house and because of electrical mods, the GC knows I am an audiophile. He asked if I wanted soundproofing. I have never had soundproofing and don't know 1) if its effective; 2) if it will harm sound quality or improve it or not effect it.

The room is rectangular in shape and is 12 X 16 feet. Any input is appreciated.
Ag insider logo xs@2xgarakawa
G, Mass, in the four walls as well as 5/8 sheetrock will make an audible improvement. Cross Fur the ceiling AFTER sheetrock with RC and you will reduce or eliminate the ugly treatments later. Use 6inch accoustic insulation in 31/2 inch walls combined with the 5/8 board and you reduce the resonant freqency of the wall. These few extras will generate HUGE returns on money spent. Z.
Are you sure the GC knows anything about acoustic treatment vs. soundproofing? The former is to improve the quality of sound inside the space and the latter is to keep it from getting out of the space. Not at all the same.

For info, take a look at:

Soundproofing keeps the sound of airplanes and crying children out of the room and minimized the sounds of explosions in the rest of your house.

With regard to getting a flat response and killing slap echo within the room, that's a whole other ballgame that requires diffusers, absorbers, bass traps, etc.

If you play your music loud, and you feel that soundproffing the room would keep your music from disurbing the rest of the household, go for it. (I only wish that I had that option!) I don't think it will affect the sound quality (to a large extent) to be honest.

My two cents worth anyway.
Sound proofing is different, and I would "assume" that it wouldn't help the sound out in the way you would want it to. It might just make it so you can listen as loud as you want without bothering anyone else.

I hear that sound proofing is incredibly expensive, so I don't know if he meant real sound proofing.
Definitely improves!
Have your contractor do the interior walls of the room with "2x6 staggered stud" construction. He should know what that is. Then, have insulation woven between the studs. That's a good start.
You may also consider using "resilient channel" or "hat channel" (same thing) in order to "hang" the wall off the studs. You can get it at Home Despot too. It reduces sound vibrations from coming through the walls. Works great. If you already have 2x4 walls, I'd definitely do the resilient channel.

Check into using "Homasote" a man made paper material in 4x8 sheets from Home Depot. It goes up like drywall, but weighs only about 1/3 as much. Put that on prior to drywall. I found it did a great job at blocking noise.
Be sure to close any openings, i.e. holes around outlets, etc. since these are leaks for sound to travel through.
Or you can do double layers of drywall, having the sheets put on perpendicular to each other so joints don't line up. Don't forget to treat ceilings too!
Plan out your wiring well, since it'll be harder to access later (i.e. fishing new wiring).
Wire the room for HT use whether or not you will use it for that. Down the road you may change your mind, and it will make the dedicated room more appealing if you sell.

Putting plenty of effort into sound diminishing rooms pays off handsomely. I built 7.5" thick walls for my HT (in basement) and the washer and dryer in the utility room ten feet away almost cannot be heard at all. My walls are (from interior to exterior) .5" sheet rock, 2x6 staggered stud walls with insulation, .5" double leg resilient channel, .5" Homasote sheeting, and .5" sheet rock.

Don't forget, you'll need special order solid core door for such room; when I looked, the largest single piece door jamb was 7.5" width. I originally wanted an 8" wall, but changed it to accomodate the door jamb limitations.

"Room Tuning" is the term for adjusting the sound of components within the room. Also well worth pursuing. But, it's kind of sad to build a room wrong (without sound proofing) then treat it all nicely in interior and have intrusions through the walls from the outside.

If you do the room well enough, it will seem as though you have stepped into another building when you enter it. People often comment on how quiet my HT is, since no sound intrudes from the rest of the house. It is acoustically a separate building. That should be your goal, and you have the golden opportunity to do it now that the walls/ceiling are not done.

Also for serious consideration: if you are handy (even if you're not - I had never built anything prior to my HT) and have the spare time, consider the contractor not finishing the room, but you doing it. Headaches? Yes, but the one luxury you get doing it yourself is TIME; time to consider logistics, electrical plan for lighting, outlets, etc. Time for considering where to place components, i.e. in wall, or under screen. Time to pick sconces, wall finishings, etc. Time to insulate well, not quickly. Time to caulk openings and consider if you can build a sound proof ceiling. Time to consider entrance to room, where the surrounds will be and wire for them, etc.
This is all situational. Anything you do to soundproof will be well rewarded as the room is used.
Go to our resource page. Look in the column of acoustical articles. You will see the 10th one on Sound Isolation. I recommend you read this. It will give you some valuable insight I hope.
Doug came pretty close, but hat and resilient are two different and mutually exclusive products! Hat channel is just for furring, RC decouples the sheetrock from the framing. You want RC. Sound board is also a great product,just make sure to cover it with 5/8. 1/2 rock moves too much and absorbs Bass energy. Go to a REAL supplier to order door frames in any width you desire in 1/16 inch increments. Walking into the new room SHOULD feel completely different. You should NOT need any ugly treatment(s) With stiff, decoupled, insulated walls and lid. Z.
Zieman, thanks for the clarification! Resilient Channel sounds much more impressive for us audiophiles.