2. misc-audio
  3. 191374-166334

FEEDBACK HUM: Eversolo DMP A8 related

I cannot figure this out… just got an EVERsolo… getting a HUM upon changing INPUT SOURCES on it… prior to it making the switch from say RCA to ARC to TUNE-IN… then upon shutting it down, all I have starting up my system is loud hum feedback here this AM through my McIntosh MC 2105, and my Cornwall Fours. Weird. Like it’s taken over. Any replies appreciated!

128x128moose89
tony1954's avatar
tony1954
1,045 posts
 

If you just got the Eversolo, can you return it?

There do seem to be more "issues" with Eversolo products than one would expect.

coralkong's avatar
coralkong
660 posts
 

Well....unhook it from your system and see if the hum goes away. If it does, return it.

bbarten
65 posts
 

For what it's worth I got one about six months ago and haven't had any issues with it at all.

g2the2nd
70 posts
 

I have no issues with my A8. Are you running a balanced output? If so do you have the right pin configuration selected?

dr-boop
85 posts
 

Disconnect the cables/sources, one at a time. Maybe it's one pair of RCA, or the HDMI causing it. 

Or maybe you get the hum when the A8 is simply plugged into the wall with no source(s) connected and nothing connected to outputs. See what you find by isolating connections and that should point you at the root cause.

More to discover