Home recording studio questions

Monitor wise...definitely look at PMC. Most of the really serious studios use them and there is a definite advantage to having the same voice as what the big boys use.

I have a similar setup that I use to do home recording. My preference is for mac. I have both a G4 desktop style and a laptop. The desktop uses a PCI interface card that runs to a MOTU 2408 MK 3 interface via firewire. The 2408 has 8 ins and outs via 1/4" balanced connectors as well as 2 digital SPDIF outs and one in. It also can connect to ADAT lightpipe as well as the Tascam format. The Laptop uses a PCMCIA card (the size of a credit card) that slides into the side and runs to a similar to the MOTU interface box that allows similar input options. The MOTU unit running from the desktop has far better sound quality than the laptop system, it probably has more to do with the connection via PCI slot vs. the card slot in the laptop than the gear I bet.

I used to run a ton of intputs through a 32 channel analog mixer, and when I switched over to the all in the computer method, audio quality went way up. Of course I have tweaked the 2408 with an aftermarket power cord and isolation, which really improve things a lot as well.

As for monitoring. I picked up a Meridian 566 DAC and 518 digital processor for around 500 each. So I run from the 2408 via SPDIF to the 518, from the 518 via SPDIF to the 566 and then connect the 566 to your preamp. When recording you run from the 2408 to the 518 and from 518 to the CDR recorder then loop out to the 566 for monitoring. The differences that the 518 make to a recording are unbelievable and well worth the 500 used price tag. The 566 is also a great buy even though it only works in the monitoring chain.

My thoughts are that if you don't have an excellent monitoring system that is telling you all about your mix how can you do a good mix. Hopefully your friend already has a good sounding system, that is far better for mixing and monitoring than any set of nearfields. Tell him to stay away from the pro audio guys, they know about features and tech stuff, but they usually don't know crap about fidelity.

I have my studio system listed you can check it out.

I use a Tascam FW 1884 surface controller running into Windows XP with Cubase sx 2.0 as the recording software. Works fabulous and has never crashed. Also supports 5.1 surround mixing at high res formats if desired.

Slappy,I'm not trying to rain on your friend's parade but if money is an issue,he'd be better off renting studio time. You can rent a lot of studio time for 200 dollars an hour(including the technicians and the end product master) for what it would cost him to build one himself. Of course,it's a different story if he wants to rent it out to others.

These guys are right on the money. I buy a lot of stuff from Sweet Water Sound. Tons of software, all the hardware, excellent advice, I highly recommend them.