Atmasphere, in general I agree with what you say with point source speakers that are not digitally corrected and time alligned. However when it comes to linear arrays particularly tall ESL dipoles the situation changes somewhat. If the subwoofer system does not want to get loss under the linear array it also has to radiate like a linear array. This requires a driver every 5 feet or so with the line ending at wall boundaries. If the system were on a long wall this might require more than four units. Dipole ESLs just do not do well under 100 Hz. As you mentioned crossing up higher than 80 Hz without digital correction won't work well. You will always know there is a sub woofer down there. But with time and phase alignment you can go up higher. I cross at 125Hz 4th order and unless you open your eyes you would never know there was a separate subwoofer system and because the sub woofers are forming a linear array the relative volume between the subs and satellites does not change with distance. The linear array also minimizes room effects which allows me to do room correction with much less power. The the resulting improvement in performance of the ESLs at volume is imminently noticeable as is the marked improvement in head room. It's like adding a turbocharger to your engine.
Mike
Mike