Okay, so you've been bitten by the vinyl bug. It happens to us all at one point or another, and there ARE worse things in life that could happen....
If you are serious about spinning records, I would suggest a modest start. I know of several people who commited to vinyl in a BIG way, and found out after about two months use that they could stand it no longer (using records really is not for everyone). Problem was, of course, they had brand new expensive gear that they had a hard time selling, and only regained partial cost.
My suggestion FWIW, is to start with something simple, effective, and relatively inexpensive to see whether you like both the sound, and inconvenience of vinyl playback, and then move up to a more substantial rig if and when you decide to make the "big commitment". Finding a few more records to play might not be a bad idea either.
If you dig around carefully, you should be able to come up with a more than adequate vinyl system for under $1500. I would try to choose some common and popular components so that resale would not be an issue when/if the time comes. Some of the possible component choices:
Rega RB 250 or 300 arm - not a wallet buster, commonly used on a wide variety of turntables, and readily available for purchase; hell I think I have one in good shape if you want to haggle :)
Basis 1400 turntable - two available this week with Rega arm for less than $1000.
VPI Scout turntable - available used with arm for less than $1500.
NAD PP2 phono stage - gets you going for about $100 or so...
Blue Circle BC27 phono stage - a real winner for about $500.
All sorts of good cartridges available - my choice would be an inexpensive Dynavector, or an Ortofon Kontrapunkt A. Check the Needle Doctor, he usually has a few dandy specials on.
Add your choice of interconnect (simply too many to mention) and you should be good to go, without incurring a small motgage.
If you are serious about spinning records, I would suggest a modest start. I know of several people who commited to vinyl in a BIG way, and found out after about two months use that they could stand it no longer (using records really is not for everyone). Problem was, of course, they had brand new expensive gear that they had a hard time selling, and only regained partial cost.
My suggestion FWIW, is to start with something simple, effective, and relatively inexpensive to see whether you like both the sound, and inconvenience of vinyl playback, and then move up to a more substantial rig if and when you decide to make the "big commitment". Finding a few more records to play might not be a bad idea either.
If you dig around carefully, you should be able to come up with a more than adequate vinyl system for under $1500. I would try to choose some common and popular components so that resale would not be an issue when/if the time comes. Some of the possible component choices:
Rega RB 250 or 300 arm - not a wallet buster, commonly used on a wide variety of turntables, and readily available for purchase; hell I think I have one in good shape if you want to haggle :)
Basis 1400 turntable - two available this week with Rega arm for less than $1000.
VPI Scout turntable - available used with arm for less than $1500.
NAD PP2 phono stage - gets you going for about $100 or so...
Blue Circle BC27 phono stage - a real winner for about $500.
All sorts of good cartridges available - my choice would be an inexpensive Dynavector, or an Ortofon Kontrapunkt A. Check the Needle Doctor, he usually has a few dandy specials on.
Add your choice of interconnect (simply too many to mention) and you should be good to go, without incurring a small motgage.