RB300 Rewire or Graham Robin for my Gyrodec ?

If you are skilful you can rewire the Regs your self. Ie
from 'tags' till RCA connectors. The Discovery wiring is
excelent btw. But the most easy way is from the Din connector in the 'collar'. You need to solder the actual
Rega wiring to a new Din (male)connector and then use any
phono-cable from there. The problem by Rega is this part;
from the collar till the RCA connectors. 'a piece of junk'
as you (the Anglo-Saxons)call it.
Regards,

gslone has it right.

Sticking to what you have asked , I own a Gyro SE MK ii and did the rewire with the incognito kit a few years back for a cost of about 150 at the time. For the money and the improvements I found it gave it was well worth it. Outside of what you ask I agree that the din connector replacment, and a kit is available offers more options for cables but certainly at a greater cost. The option for another (real?)arm will give better end results, but will require a much greater investment and will require a new mounting plate, your cartidge may or may not be suitable with a new arm and may not be a good match for the gyro if not selected properly and most of the better arms don,t come with cables or need better cables to get the performance out of them. The Rega certainly isn,t a Graham or an SME that I now am using but for a entry arm ,cost versus value I think its prooved itself through the decades .

Try smetonearms out of Canada. They offer the SME M2 (9") for $999 plus $25 for shipping. Everyone else retails this arm for $1600 or $1700.

If you rewire your rega with pure silver wire, this makes a big difference. I followed directions from a page called Hotrod Rega a few years ago but can't seem to find it anymore. If you need a recommendation for silver wires let me know. The whole project was very affordable.