I agree. Sorry.
Reviews with all double blind testing?
In the July, 2005 issue of Stereophile, John Atkinson discusses his debate with Arnold Krueger, who Atkinson suggest fundamentally wants only double blind testing of all products in the name of science. Atkinson goes on to discuss his early advocacy of such methodology and his realization that the conclusion that all amps sound the same, as the result of such testing, proved incorrect in the long run. Atkinson’s double blind test involved listening to three amps, so it apparently was not the typical different or the same comparison advocated by those advocating blind testing.
I have been party to three blind testings and several “shootouts,” which were not blind tests and thus resulted in each component having advocates as everyone knew which was playing. None of these ever resulted in a consensus. Two of the three db tests were same or different comparisons. Neither of these resulted in a conclusion that people could consistently hear a difference. One was a comparison of about six preamps. Here there was a substantial consensus that the Bozak preamp surpassed more expensive preamps with many designers of those preamps involved in the listening. In both cases there were individuals that were at odds with the overall conclusion, and in no case were those involved a random sample. In all cases there were no more than 25 people involved.
I have never heard of an instance where “same versus different” methodology ever concluded that there was a difference, but apparently comparisons of multiple amps and preamps, etc. can result in one being generally preferred. I suspect, however, that those advocating db, mean only “same versus different” methodology. Do the advocates of db really expect that the outcome will always be that people can hear no difference? If so, is it the conclusion that underlies their advocacy rather than the supposedly scientific basis for db? Some advocates claim that were there a db test that found people capable of hearing a difference that they would no longer be critical, but is this sincere?
Atkinson puts it in terms of the double blind test advocates want to be right rather than happy, while their opponents would rather be happy than right.
Tests of statistical significance also get involved here as some people can hear a difference, but if they are insufficient in number to achieve statistical significance, then proponents say we must accept the null hypothesis that there is no audible difference. This is all invalid as the samples are never random samples and seldom, if ever, of a substantial size. Since the tests only apply to random samples and statistical significance is greatly enhanced with large samples, nothing in the typical db test works to yield the result that people can hear a difference. This would suggest that the conclusion and not the methodology or a commitment to “science” is the real purpose.
Without db testing, the advocates suggest those who hear a difference are deluding themselves, the placebo effect. But were we to use db but other than the same/different technique and people consistently choose the same component, would we not conclude that they are not delusional? This would test another hypothesis that some can hear better.
I am probably like most subjectivists, as I really do not care what the outcomes of db testing might be. I buy components that I can afford and that satisfy my ears as realistic. Certainly some products satisfy the ears of more people, and sometimes these are not the positively reviewed or heavily advertised products. Again it strikes me, at least, that this should not happen in the world that the objectivists see. They see the world as full of greedy charlatans who use advertising to sell expensive items which are no better than much cheaper ones.
Since my occupation is as a professor and scientist, some among the advocates of double blind might question my commitment to science. My experience with same/different double blind experiments suggest to me a flawed methodology. A double blind multiple component design, especially with a hypothesis that some people are better able to hear a difference, would be more pleasing to me, but even here, I do not think anyone would buy on the basis of such experiments.
To use Atkinson’s phrase, I am generally happy and don’t care if the objectivists think I am right. I suspect they have to have all of us say they are right before they can be happy. Well tough luck, guys. I cannot imagine anything more boring than consistent findings of no difference among wires and components, when I know that to be untrue. Oh, and I have ordered additional Intelligent Chips. My, I am a delusional fool!
I have been party to three blind testings and several “shootouts,” which were not blind tests and thus resulted in each component having advocates as everyone knew which was playing. None of these ever resulted in a consensus. Two of the three db tests were same or different comparisons. Neither of these resulted in a conclusion that people could consistently hear a difference. One was a comparison of about six preamps. Here there was a substantial consensus that the Bozak preamp surpassed more expensive preamps with many designers of those preamps involved in the listening. In both cases there were individuals that were at odds with the overall conclusion, and in no case were those involved a random sample. In all cases there were no more than 25 people involved.
I have never heard of an instance where “same versus different” methodology ever concluded that there was a difference, but apparently comparisons of multiple amps and preamps, etc. can result in one being generally preferred. I suspect, however, that those advocating db, mean only “same versus different” methodology. Do the advocates of db really expect that the outcome will always be that people can hear no difference? If so, is it the conclusion that underlies their advocacy rather than the supposedly scientific basis for db? Some advocates claim that were there a db test that found people capable of hearing a difference that they would no longer be critical, but is this sincere?
Atkinson puts it in terms of the double blind test advocates want to be right rather than happy, while their opponents would rather be happy than right.
Tests of statistical significance also get involved here as some people can hear a difference, but if they are insufficient in number to achieve statistical significance, then proponents say we must accept the null hypothesis that there is no audible difference. This is all invalid as the samples are never random samples and seldom, if ever, of a substantial size. Since the tests only apply to random samples and statistical significance is greatly enhanced with large samples, nothing in the typical db test works to yield the result that people can hear a difference. This would suggest that the conclusion and not the methodology or a commitment to “science” is the real purpose.
Without db testing, the advocates suggest those who hear a difference are deluding themselves, the placebo effect. But were we to use db but other than the same/different technique and people consistently choose the same component, would we not conclude that they are not delusional? This would test another hypothesis that some can hear better.
I am probably like most subjectivists, as I really do not care what the outcomes of db testing might be. I buy components that I can afford and that satisfy my ears as realistic. Certainly some products satisfy the ears of more people, and sometimes these are not the positively reviewed or heavily advertised products. Again it strikes me, at least, that this should not happen in the world that the objectivists see. They see the world as full of greedy charlatans who use advertising to sell expensive items which are no better than much cheaper ones.
Since my occupation is as a professor and scientist, some among the advocates of double blind might question my commitment to science. My experience with same/different double blind experiments suggest to me a flawed methodology. A double blind multiple component design, especially with a hypothesis that some people are better able to hear a difference, would be more pleasing to me, but even here, I do not think anyone would buy on the basis of such experiments.
To use Atkinson’s phrase, I am generally happy and don’t care if the objectivists think I am right. I suspect they have to have all of us say they are right before they can be happy. Well tough luck, guys. I cannot imagine anything more boring than consistent findings of no difference among wires and components, when I know that to be untrue. Oh, and I have ordered additional Intelligent Chips. My, I am a delusional fool!
185 responses Add your response
Tbg: If all you care about is finding a great speaker, why'd you start this thread??? All individuals are not the same. I never said they were. I think you're hung up on the idea of a hypothesis about what a majority of people can hear (in which case it would be necessary to test a random sample of all people). But the more common question in audio is, can anybody hear it? To answer that question in the affirmative, all you have to do is find *one* person who can hear a difference between two components. That's why testing a single individual can be appropriate. (Just remember that, in a single-person test, the null hypothesis relates to that single person; if he flunks, you can't conclude anything about anyone else.) Here's a good example of the kind of testing that researchers do: http://www.nhk.or.jp/strl/publica/labnote/lab486.html Note that one of their 36 subjects got a statistically significant result. In a panel that large, this can easily happen by chance. The check this, they tested that individual again, and she got a random result, suggesting that her initial success was merely a statistical fluke. |
Pabelson, frankly I don't care enough about this question to expend the time necessary to do such work. I am more concerned with find a great loud speaker. I just do not understand the expectation that all individuals are the same in these tests. It is not statistical significance, it is improbability that you are talking about. How do you know when you wrongfully reject the null hypothesis? |
I just think the proper hypothesis should be that a sample of people can hear a difference between cables or amps. Well, that's one possible hypothesis. Another possible hypothesis is that one particular individual can hear a difference. That's the equivalent of testing the fairness of one particular coin. Note that the sample size isn't one. It's the number of listening trials/coin flips. I am only concerned that the choice of the sample size may be determined by what the researcher's intended finding might be. The choice of sample size isn't what's critical here. The statistical significance is. Granted, larger samples reduce the possibility of false negatives, but it's not as if there have never ever been any ABX tests with large sample sizes. The Stereo Review cables test had a sample size of 165. The possibility of a false negative is very low with a sample that big. (Since you teach statistics, I'll let you do the math.) And if you think the reason these tests come up negative so often is sample size, you as a "scientist" ought to know how to respond: Do your own experiment. Complaining about other people's data isn't science. I think it is a far more interesting hypothesis to suggest that those with "better ears" would do better. Then test it. The SR panel was a pretty audio-savvy bunch, as I recall. I don't think most audiophile would be convinced or should be convinced that all amps or wires sound the same. Are you saying they're all close-minded? |
As I recall, statistics can be very useful. Stat 101....Intro to Statistics Stat 102....Statistic Applications (How to fool others using statistics). Stat 201....Advanced Statistics (How to fool yourself using statistics). Just kidding. In my work with balistic missile inertial guidance systems, such as the estimation of CEP (circular error probability) based on a couple of hundred modeled error sources, I have been exposed to the most arcane forms of statistics. One must always remain aware of the risk of fooling yourself, and be able to laugh about it. |
Palelson, perhaps we just have a language difference. I would certainly concede that for a coin to be heads 15 out of twenty tosses is improbable. This probability is at the root of statistical inference which, of course, seeks to assess support for a hypothesis in the population from a sample. There is always the possibility that the sample is unrepresentative and that we might wrongly reject the null hypothesis when it is actually true. I just think the proper hypothesis should be that a sample of people can hear a difference between cables or amps. The null hypothesis is that they cannot. It would be very difficult with a sample of one to achieve statistical significance, so you are apt to accept the null hypothesis. However, a sample of 25,000 would assure you statistical significance. I am only concerned that the choice of the sample size may be determined by what the researcher's intended finding might be. I think it is a far more interesting hypothesis to suggest that those with "better ears" would do better. I don't think most audiophile would be convinced or should be convinced that all amps or wires sound the same. |
Tbg: For someone who "teaches statistics," you express a rather narrow perspective on the field. Think about how you would use statistics to determine whether a coin is fair. (You do agree that you can use statistics to do this, don't you?) The problem of determining whether a certain subject can hear a difference between two components is precisely the same. Do his results suggest that he was just guessing which was which (the equivalent of flipping a fair coin), or that he could indeed hear a difference (flipping an unbalanced coin). At any rate, it really doesn't matter whether you think statistics is applicable here. People who actually study hearing and do listening tests use statistics for this purpose every day of the week. I would define undeniable differences as those for which measurements would lead us to predict such differences. If there are measured characteristics of two components that are above the known threshold of human detection, then there's no real need to do a DBT to determine whether they sound different. For example, if one amp has a THD of 0.1%, and the other is at 3%, we can safely assume that they are audibly different. Transducers typically measure differently enough that we can assume they sound different. Ditto many (but not all) tube amps. Solid state amps, unless they are underpowered for the speakers they are driving or have a non-flat frequency response (perhaps due to an impedance mismatch) generally do not. Before I get tagged with the "measurements are everything" slur, let me say that these measurements can only predict WHETHER two components will sound different. If they do sound different, the measurements cannot tell us (at least not very well) which you will prefer, or even in what ways they will sound different to you. For more info on DBTs, see the ABX home page, mirrored here: http://www.pcavtech.com/abx/ |
Post removed |
Tvad sez: I said I don't believe I can reproduce the live event. Indeed, this is what I believeOf course you can't. You can only reproduce what the recording process produced and stored on the medium used... Add to that, the imperfections & losses due to the recording process, the imperfections & losses due to the storage medium and the imperfections & losses due to the reproduction system. In all of our rantings, we are addressing the last of these (the repro system) At its best, a reproduction system aims at coming close to the original, i.e. what's on the RECORDED medium (not the live event); this seems to me a reasonable target for us audiophiles. For the live event, you go to the concert hall. |
Post removed |
I even suspect the people in the deeply tinted window SUV with the fancy wheels that was absolutely booming "urban youth music" were lost in the music and tapping their toes. I should have rolled down my window and said hello to my audiophile brothers. When I read this. I was actually picturing somewhere in suburbia! :-) |
Tvad, I applaud your dedication to this hobby and I truly wish you derive an enormous degree of personal satisfaction for being a practicing audiophile, but I still strongly disagree with you on a key issue. Tapping your toes and grooving to the music is great, but even non-audiophiles tap their toes. As I see it audiophiles are about listening to music reproduced with a high degree of fidelity to the source material. In your 6/13 post you state that you are not interested in fidelity, only whether it makes you feel good. It's real easy to put together a system that sounds good. Pump up the bass, give it a big syrupy midrange and roll off the high end and even well schooled audiophiles will be tempted. It's even easier putting together an "accurate" system with vanishingly low distortion and ruler flat frequency response. What makes our hobby challenging is putting together an accurate system that also sounds good. Just tapping your toes won't get you there. Boa2, how do you know that I'm not one of the brothers in the SUV? |
I mentioned this in another thread not too long ago. In blind taste testing Pepsi usually wins. When the brands are known Coke almost always wins. I think this means that Coke comes with a plethora of baggage (at least more than Pepsi) that affects objectivity to the extent that it can affect our perceptions. Can this be true of cable testing, or anything else for that matter? The odd thing is that most people do prefer Coke because we don't buy it in a blind test. To me at least, there are significant implications for audio here. If I know I'm listening to a Valhalla does it change the perception I would have had if I thought it was a Cardas or if I didn't know the brand at all? In court the least reliable evidence is frequently that of eye witnesses. For instance, even though a group of people witness the same event their perceptions of the event usually vary. I think that objectivity can be extremely difficult to achieve because we heve so many more factors wired in. Another instance I find humorous is when an audio componant tests one way with sophisticated instruments (admittedly this can be less than objective, depending on the application and methodology used and the biases of the human tester) and the human perception is directly opposite. This seems yo happen more with tube equipment for some reason. Then there's that school of thought that the simple fact that something is being tested can affect the outcome of the test. Just some thoughts. |
Onhwy61, your comments read like a racist expressing his disdain for the infusion of impurities into the master plan of audiophilia. I don't if you intended them to be so exclusive, but they struck me that way. It would be fair enough to say that you do a hobby one way, and allow others to walk their own paths. But if I'm hearing you accurately, then I'll personally opt for a scotch with my music. Of course, not while I'm out bumpin' with the brothers in my SUV. |
Post removed |
Tvad, I find your last post preposterous. You state that you only care about closing your eyes and getting lost in the notes and about tapping your toes to the rhythm. If that's what our hobby is about then anyone with an iPod on the subway is an audiophile. I have a friend who regularly gets down like that with his Bose Wave player. I even suspect the people in the deeply tinted window SUV with the fancy wheels that was absolutely booming "urban youth music" were lost in the music and tapping their toes. I should have rolled down my window and said hello to my audiophile brothers. Your espousal of unfettered radical subjectivism is precisely where a large part of our hobby has gone wrong. By dismissing any pretense of fidelity to the source material you have made all systems effectively equal because someone somewhere will think any system sounds great. Beyond what makes someone feel good there actually are objective standards for judging whether a piece of equipment faithfully reproduces an input signal. We can argue about exactly what these standards are, but it would be foolish to ignore them. BTW, if getting lost/toe tapping is a high priority, a bottle of good Scotch is a more effective system upgrade than any cable change. |
Pabelson, I must admit that I had not known of the Stereo Review's db tests. Out of curiosity I will have to look them up. Are there others? I teach statistics. Apart from making judgments about the population from a random sample, the concept of a confidence interval has no meaning. We never can make the conclusion, "...that the listener really heard a difference, and wasn't just guessing lucky." With a random sample of sufficient size, you can get a confidence level of .05 which might be that your experimental group's mean response was right 15 out of 20 times. This is why I ask about this number in the absence of a random sample. 15 out of 20 may impress you, but it has no basis in statistics. I also do not understand the notion that db testing is unneeded for, "components where differences are undeniable." Undeniable by whom? I grow less convinced that db testing has any potential for sheading light in the evaluation of stereo equipment. Tvad, were good db testing procedures, I would think we would have to assess whether some were better evaluators than others. As I said earlier, I still think review magazines would be boring and that most audiophiles would ignor the results, if any were positive. |
Post removed |
Tbg: If these tests didn't yield positive results, they'd be useless for research. Just because they don't yield positive results when you want them to doesn't make them invalid. A good example of a mix of positive and negative tests is the ABX cable tests that Stereo Review did more than 20 years ago. Of the 6 comparisons they did, 5 had positive results; only 1 was negative. (The one negative, however, used similar cables and had subjects listen to music rather than noise. In most of the other 5 cases, the measured differences were much greater; in one, they listened to noise rather than music--it's easier to hear level and frequency differences with full-spectrum noise than with music.) I presumed you knew statistics. 15 out of 20 is the 95% confidence level, which means that we can be 95% sure that the listener really heard a difference, and wasn't just guessing lucky. The 95% threshold is a reasonable one in this case. I suspect the tests you did involved multiple listeners listening at the same time. It's better to use one subject at a time, and to let the subject control the switching. But the Stereo Review tests used multiple listeners at once, and got plenty of positive results. Subjectivists often object that ABX tests use quick switching between components, but there's solid research showing that this approach actually works better--it's easier to hear differences when you can switch immediately between the two. I know subjectivist audiophiles consider that heresy, but the research is pretty clear. Some manufacturers use DBTs, others don't. It makes no sense for components where differences are undeniable (microphones, turntables, cartridges, and speakers are good examples). As for "voicing" of amps and cables, people who claim to do that without DBTs are either fooling themselves or trying to fool you. Almost nobody has a preconceived notion that things sound the same. Many objectivists used to be subjectivists till they started looking into things, and perhaps did some testing of their own. As for reviews, a high-end magazine that used DBTs couldn't survive. Advertisers would pull out, and readers would revolt. Better to give the people what they want. |
Pabelson, you added greatly to my historic understanding of double blind testing. Can you please give citations for the instances where same/different tests yield differences? I think something is fundamentally wrong with the research design unless there are such instances, including just single run throughs of the signal. I am quite uncomfortable with the idea that finding a single person who can hear differences 15 out of 20 times would be convincing. I do not know how you can set a level here. Why 15 out of 20? All of the instances were I participated in same/different db testings were too quick and there is too high a probability of the respondent guessing. I also felt that the testing was unrealistic of the listening experience. By contrast the A, B, C etc. comparison using double blind was more analogous to the listening experience. As I said, because of this, I would be interested in such testings. Here I would again suggest the hypothesis that could be tested as to whether there were differences among those with long experience in working with music. Advancing the field. Yes, that would be nice. I have seen quality components, IMHO, be ignored because of name brand manufactures cache. I have little question that the field has advanced greatly during the 40 years that I have been involved, especially digital. Someone has suggested that manufacturers use double blind testing all the time, but in my experience, they do not. There is also the voicing of components by such notable designers as Kondo, etc. I presently am overwhelmed by the Shindo Labs 301 turntable. All of this is without the aid of double blind testing. I have no doubt that some proponents of dbt are sincere as I am sure that the overwhelming number of instances where the small sample are unable to hear a difference leads some to embrase db because it fits their preconceived judgments, especially if they cannot afford more expensive gear. I also still say that reviews would be very curious with dbt. Would you start with 100 amps being compared and then each month add another? Would anyone buy such a magazine or use it for judging what they will buy? Would manufacturers concede that product D is indeed better and withdraw their amps? |
Tbg: The main question of your post seems to be, Do objectivists like Arny Krueger extol blind tests only because they like the results? The short answer is no. Arny K. and his ilk did not invent blind tests as a weapon to use against the high-end industry. In fact, they did not invent blind tests at all. Blind listening tests were developed much earlier by perceptual psychologists, and they are the basis for a huge proportion of what we know about human hearing perception (what frequencies we can hear, how quiet a sound we can hear, how masking works to hide some sounds when we hear others, etc.). Blind tests aren’t the only source of our knowledge about those things, but they are an essential part of the research base in the field. Folks in the audio field, like Arny, started using blind tests because of a paradox: Measurements suggested that many components should be sonically indistinguishable, and yet audio buffs claimed to be able to distinguish them. At the time, no one really knew what the results of those first blind tests would be. They might have confirmed the differences, which would have forced us to look more closely at what we were measuring, and to find some explanation for those confirmed differences. As it turned out, the blind tests confirmed what perceptual psychologists would have predicted: When two components measured differently enough, listeners could distinguish them in blind tests; when the measurements were more similar (typically, when neither measured above known thresholds of human perception), listeners could not distinguish them. Do all blind tests result in a “no difference” conclusion? Of course not, and you’ve cited a couple of examples yourself. Your preamp test, for one. (Even hardcore objectivists agree that many preamps can sound different.) Arny’s PCABX amp tests, for another. (Note, however, that Arny typically gets these positive results by running the signal through an amp multiple times, in order to exaggerate the sonic signature of the amp; I don’t believe he gets positive results when he compares two decently made solid state amps directly, as most of us would do.) Your comments on statistical significance and random samples miss an important point. If you want to know what an entire population can hear, then you must use a random sample of that population in your test. But that’s not what we want to know here. What we want to know here is, can anybody at all hear these differences? For that, all we need to is find a single test subject when can hear a difference consistently (i.e., with statistical significance). Find ANYBODY who can tell two amps apart 15 times out of 20 in a blind test (same-different, ABX, whatever), and I’ll agree that those two amps are sonically distinguishable. Which leads to a final point. You say you are a scientist. In that case, you know that quibbling with other scientists’ evidence does not advance the field one iota. What advances the field is producing your own evidence—evidence that meets the test of reliability and repeatability, something a sighted listening comparison can never do. That’s why objectivists are always asking, Where’s your evidence? It’s not about who’s right. It’s about getting at better understanding. If you have some real evidence, then you will add to our knowledge. |
I agree "synergy" is an overused word, but for Blind Testing, what would be your reference amp, preamp, source, speakers, wire, ect.? Would the reference be what the manufacturer prefers, you prefer or I prefer? In the world of science there are set standards, but what are the set standards in the Audio world? We can measure db, distortion, ect., but in the Audio world there is not a perfect standard for what sounds the best to you or I. A HONEST reviewer would be much appreciated in this dishonest world we live in. |
I am somewhat unhappy that I spoke of J.A. in my post as he brings along a lot of baggage. Many of you who have posted above seem sincerely to believe that better conceived db tests would yield recommendations of some components or cables. My reading of what I have seen posted is that many of those advocating db testing expect a conclusion that says there are no differences and thus buy the cheapest. This seems to have been J.A.'s experience in the 3 amp comparison, but in my limited experience such comparisons with db do yield a recommendation, as in the Bozak instance. Fundamentally, I have no confidence in same/different comparisons in db with too small a sample and with too much dependence on statistical significance tests. A conclusion that all amps are the same or that all cables are the same is just to at odds with my experience to be acceptable. Perhaps when you randomly assign some to the drug and others to the placebo, double blind testing makes research design sense. But I do not concede that db testing is the fundamental essence of the scientific method. Experimentally, a control group design makes sense but double blind testing seldom is necessary. Often it takes great originality to cope with subjects knowing they are being experimented on. The Hawthorne Electric study is the best example of this. I also really wonder how A, B, and C comparisons of amps, etc. using double blind would be done and reported. How would the random sample be drawn , and where would they assemble? And would we need to assess the relationship between more qualified listeners and others? There are some reviewers whose opinions I am responsive to as they have previously said things consistent with what I hear. With double blind testing there would be no reviewers I presume. |
What seems to be beyond audiophiles is that the only criteria of blind testing is that the participant has no information but the presented experience. Those who think blind testing is conceptually flawed have to answer a question: If what is desired is an unbiased review of sound quality, how does product information promote that? Since "synergy" (I hate that word) is a factor in any stereo/component review, why bring it up as a factor for blind testing? The same situation exists with time. How is time a factor for bind testing but for not "sighted" testing? I hate to ring this bell, but the drugs everyone takes...blind testing. Like a million psychology experiments...blind testing. Scientists made eliminating bias work for them - audiophiles haven't, but still some think they know better. |
Is it just me or is the word 'synergy" the magic word that enables anyone to justify ANY componet, even if a blind test yeilds results that suggest the peice of equipment wasnt worth the money? I know that everything has to come together to get your toes' tappin, but it seems the word Synergy is often used as a safe word....and all opinions and bets are off. It reminds me of the not so distant past when pornography was trying to be defined and the conclusion was "I cant define it, but I know it when I see it".....IMO that is way to vague. I guess it all boils down to each person and the sound they hear, to each his own, but as long as the word synergy is used...alot of folks should refrain from putting down anothers choices, (tubes-vs-solid state, digital-vs-vinyl..and so on, because synergy wins every time. |
My take on the article was that J.A. was being deliberately obtuse because he has no intention of ever doing db tests. It also seems unreasonable to argue that any difference which can not be detected unless you know which component you are listening to is a sonic difference. I think the obvious problem that J.A. preferred to ignore is that they just did a lousy job with the db test. If 'toe tapping' or emotional response is the right measurement criteria & if it takes more than a quick a-b switch to guage the measurement criteria, that is aok. You just have to set up the test to measure the right criteria & allow time for the measurements to occur. I.E. - It is not that there is any problem with db tests, it is that a poorly designed test will not give accurate information. IMHO. |
I have nothing against double blind testing. The only thing I question is the listening time period. Initial impressions may change over a longer period of time. Two weeks would probably be more appropriate than a couple of hours. My bet is that listening impressions would be dramatically different. In any event it would make an interesting test. |