In your post you say you like the Shindo sound.Then your question asks "which gives better sound"
You answered your own question.
To you Shindo sounds better.
To others Atma-sphere is the choice.
Are you going to use a MM or MC cartridge.
I happen to enjoy the Shindo sound but the gain in the phono stage is low for many Moving coils and a SUT may be needed.
The correct choice would be what sounds best to you.Not what sounds best to others. |
I have no experience with Shindo and just recently heard an Atmasphere and thought very highly of it. My all time favorite pre is the SMC VRE1-b but it's just not in reach at this time. I no nothing about the Atmasphere phono in their pre (They do not make a stand alone phono unit) but I have heard Ralph the owner of Atmasphere is a big time analog fan so I'd assume it would very good.
You are right about Atmasphere is updating their gear all the time and offer those updates at very reasonable rates, that's why I'm leaning towards their gear. |
Have not heard Shindo, but agree Atmasphere is good place for a vinyl lover to be. Have heard phono through atmasphere amp, but do not recall what pre-amp was used. Can't imagine anything vinyl related that says atmasphere on it not sounding top notch. |
If you are using amplification with balanced inputs, especially if a balanced design internally, Atma-Sphere may well be your choice. Single ended equipment can be used very satisfactorily as well, as explained on the Atma-Sphere website. Atma-Sphere designs with their 20-year rule always in mind: they expect their products to be used for at least 20 years before needing major service (for example, new capacitors). With that in mind, they choose parts and tubes that can reasonably be expected to be available -- or to have appropriate equivalents -- 20 years down the road. Long tube life is expected -- Ralph Karsten estimates at least 10,000 hours from the power tubes and 10-50,000 hours from the input/driver tubes. Atma-Sphere's two-year general warranty also covers the tubes for one full year, not just 90 days as is commonly seen. Dealer disclosure. |
they both give good sounds... |
i have yet to hear a fully updated atma-sphere; and the dealer doesn't have the mp3 which is in my budget (and small enough to fit my space).
the shindo i liked was within my budget - just. |
I have heard both and both have been amongst some of the best sounding tube amps I have ever heard. I could easily live for the rest of my life with either (and a box of tubes). |
I don't see the point of tube preamps. Since they don't amplify anything, the primary benefits of using tubes (i.e. preserving the nuances of the signal during the gain stage) are not realized, and what you DO GET is tube hiss added to the low level signals (inside the preamp) which go on to be amplified. (BTW, tube amps, if they are even halfway decent don't produce audible hiss.) So, in my ever so humble opinion, the only place for tubes is in devices that amplify: power amps, mic amps, and phono amps; and certain miscellaneous pro gear. Don't argue with me, my mind is made up!
All that said, about two years ago, due to a series of very unusual and sad events (the death of an audiophile friend), I had the opportunity to listen to an Atma-Sphere MP-3 preamp in my system. I wouldn't have bothered, really, but I couldn't let it out of my hands without hearing the MP-3 preamp's phonostage. As someone mentioned earlier, Ralph doesn't make a standalone phonoamp. And the phonostage in the MP-3 represented my "dream" phonostage, which is:
1. Fully balanced differential circuit (best with MC cartridges which are balanced output devices to begin with.)
2. All tube gain stages from input to output! No FET's or SUT's! And unless your MC cartridge is "old technology" and has an output below .4 mV, you shouldn't need those "crutches" anyway. At .4mV cartridge output and above, there will be enough gain to keep any hiss to a minimum -- especially if you're willing to spring for the strongest 12AT7's on the planet -- the GEC A2900 ;~)
3. Believe me, I'd been searching for such a phonoamp for a long long time (but not thinking to look for one buried in a preamp!) and I never found one designed like the phonostage in the MP-3 (as well as in the more expensive MP-1).
So I removed my Levinson 26S preamp and 25S phonoamp from the system, and inserted the MP-3. Things were never the same! I use a Transfiguration Temper W (same as Ralph ;~) and at right around .6mV there was just a little hiss, but only with phono source, and cranked up pretty high. The linestage in the MP-3 is also extremely quiet for a tube preamp (no doubt because it also uses fully balanced differential circuits.)
The Levinson gear is gone. To Singapore, and at a profit well over what I paid for it 10 years ago! The MP-3 went back to Ralph for (most of) the upgrades, and to have him add two more pairs of balanced outputs (one pair isn't enough for most applications, in my opinion.) I really love this preamp and feel it equals many others at three times the price, that don't do (for me) what it does.
I only have one issue with the MP-3 (not a "problem", just an "issue" ;~) and it's the fact that the phonostage (in which I use 3 pairs of very expensive tubes,) is always ON, even when listening to other sources! I've begged and pleaded, but Ralph doesn't seem inclined to make a standalone phonoamp. I even know one person (an audio manufacturer) who only uses his MP-3 for playing vinyl! Must be nice . . . .
. |
Neil - have you rolled any tubes yet? The chinese tubes that come stock tend to be quiet and pretty reliable (though not super long lived) but their top end is, uh, well let's say less than sweet. MP-1 and MP-3 are gorgeous sounding preamps. |
Hi Tim,
My (deceased) friend,Michael, had already purchased and installed some fairly 'tasty' NOS tubes which he'd purchased from Andy at Vintage Tube Services. Some better than others; all overpriced IMO.
Anyway, the MP-3 linestage takes a pair of 12AU7's And a pair of 6SN7's; and Micheal had/has some dandies. Sylvania and RCA (red base!) 6SN7's, and a range of 12AU7's: Telefunken, Phillips, Raytheon (windmill getter!), Tung Sol blackplates, etc. I guess I like the RCA 6SN7's and the Telefunken 12AU7's best so far; but they all sound great.
The phonostage takes 3 pairs (gainstages) of 12AT7's plus one more 12AT7 which is a 'constant current' modulator (not in the signal path). I have become addicted to the GEC A2900, or its military version CV6091 (same tube.) I use them everywhere I need a 12AT7: 7 in the MP-3, 2 in my headphone amp, and four in my MC275 (McIntosh) amp. They now cost (minimum) $125 each! They have great sonics, but more important, they have the highest transconductance (a measure of a tube's gain, or 'strength') of any 12AT7. As such, they provide the best signal to noise ratio in situations like the 3 gainstages in the MP-3 phonostage -- which is what makes it actually possible to use the MP-3 with a .6mv MC cartridge and without any SUT! In my power amplifier, the 12AT7's are drivers for the KT88's, and if you use any of the four strongest KT88's as I do (EAT, GEC, Psvane, Shuguang) then this is the only driver strong enough to accurately control the grid voltage in those ultra-high-power tubes and get the best (cleanest) bass out of them. (Those four tubes all have transconductance values of 12,000 micromnhos. Every other KT88 out there is 7500 or less - usually 4500 -5500 ;~)
. |
what's the difference between the mp-1 and mp-3? also, what is the impact of the v-cap and caddock resistor upgrades? |
For the differences between the MP-3 and MP-1 preamps, the best place to start is the Atma-Sphere website, as well as discussions and reviews.
I can tell you though that the MP-3 is not a 'baby' MP-1. They both use balanced differential circuits but different tubes. And the MP-1 is a two chassis unit (with a separate power supply.) It's also about 3x or 4x the price of the MP-3 ;~)
Capacitor upgrades are generally a good idea. Whether V-Caps are the preferred upgrade, I don't know. Capacitors are like tubes - they are to taste ;~) Ralph thinks Chris Van Hul's V-caps are special; a lot of other people like other caps better . . .
Caddock resistors can provide a warmer, smoother sound, but to hear any difference, you have to change ALL OF THEM!
. |
Thanks everyone for your responses. They have all been a big help.
Odds are I would get the MP3, not just for cost but also for space considerations. But the Shindo sounds awfully good too. |
If you want to hear the difference brought by resistors, get a variety of pairs and try them in the phono load position on the backside of the preamp (at least on the MP-1, I assume a similar spot for the MP-3). They are simple to swap and the gear is so revealing that yes a single resistor's difference in each channel is audible. Audio Note Tantalums, nude Vishays, Caddocks, for example.
That's a nice lot of tubes to play with. For me, finding quiet 12AT7s was challenging. Some of my favorites are the Sylvania GB-6201 and the Siemens 12AT7. Ken-Rad and Sylvania for the 6SN7s, RCAs too. Among caps I had the CuTF version of the v-Caps installed and definitely found the upgrade worthwhile vs. stock. Andy at VTS is a great source for 6SN7s. |
I have a high-performance DIY unbalanced line stage with single 5842 RF tube p/c > Magnequest output transformers (tube rectified OPS.) My 5842 outperformed a highly regarded commercial 300B preamp and ditto a 6SN7 preamp. Yesterday I finally AB tested my 5842 vs. $4500 Atma-Sphere MP-3 line stage only w/V-Cap upgrade ($600 SRP IIRC.) The rest of the system is superb, as follows: Huge custom server/streamer built summer of 2021 has 4x the power of Chord's M-Scaler and more power than a $30k Extreme player; running HQ Player's most advanced filters/algorithms (separate outboard NUC runs Room library function only) > Holo Audio May KTE3 DAC > preamp > Atma-Sphere's class D mono blocks (ETA this month) > AudioKinesis Gina satellite w/AudioKinesis Space Generator reverberant field accessory speakers. Two kilo-watt sub amps > four AudioKinesies subs in a distributed array. All Clarity Cable. MP-3 outperformed my 5842 in every way. Bass clarity was improved a lot as was the nuance and illusion
of a human being playing an electric bass. The program was live, starting with just bass, electric
piano and maybe some percussion. The size of the venue went from largish on my 5842 to sounding
like it was outdoors; the walls and ceiling of my room seemed to disappear. Detail, clarity and transparency improved with more of
see-through effect; the presentation more closely mimicked big electrostatic panels. Image separation improved as did the space between
the images. The stage and images appeared to form a large, natural and beautiful arc from a center seat row 3 to 5. The music had more swing, verve and emotional connection, that effect that makes you savor to the last and final silence.
I was prepared for my 5842 to
outperform the MP-3; no dice!
The MP-3 is a world
class preamp IME. |
