I stream from a windows laptop through a Cardas Clear USB, to a Schiit Yiggy . I haven’t experienced the problems mentioned . The Cardas Cable Made a noticeable difference over an Audioquest Cinnamon. I have a Musical Fidelity’s transport that was recently serviced at the factory . I can switch between either a balanced digital cable or a Morrow Digital unbalanced RCA . So on the fly ( using the Schiit inputs ), I can switch from the laptop Tidal , to the same CD with 2 different cables into my tube pre . All 3 sound very close . I’m waiting on the arrival of the Project StreamBox Ultra S2 next week . I’ll replace the laptop and use the same Cardas Clear USB cable . And see what happens . I didn’t try the Bluesound 2i . I was very interested in the Small Green Computer, but I have to run via Wi-Fi for now . Like that Spiritual slogan “ More Will Be Revealed “. Happy Listening , Mike B.
Streaming Tidal - What hardware is out there beyond the Bluesound
Bluesound Node 1 has been great with streaming Tidal. I’ve upgraded my system and believe that I can likely do better with the sound quality. This is especially given that Tidal is adding more and more hi def music.
I’m thinking the Bluesound Node 2 as the natural upgrade. I would like to know if there are other options to get the best sound. I can’t spend more than $500 on the equipment.
Adam
Magnepan MG .7
Audible Illusions Modulus 2d
Bryston 4b-st amp
Rythmik f12 sub
Bluesound Node
Tidal streaming
I’m thinking the Bluesound Node 2 as the natural upgrade. I would like to know if there are other options to get the best sound. I can’t spend more than $500 on the equipment.
Adam
Magnepan MG .7
Audible Illusions Modulus 2d
Bryston 4b-st amp
Rythmik f12 sub
Bluesound Node
Tidal streaming
16 responses Add your response
+1 for both the Auralic Aries Mini and the Bluesound Node 2. I own both units. I originally bought the Aries Mini for it's DSD capabilities. Since I have now replaced my entire SONOS system with Bluesound, I now have a couple of Node 2's as well. I can confirm that they both sound great with Tidal MQA streaming. Bluesound has better software at this point and Auralic has said that they will NOT develop an Android app, if that matters to you... |
@amritash I use the Node 1 and output to my DAC. So using the Bluesound App, I will connect to Tidal and use Tidal's MQA unfolding (which isn't a complete unfolding). The Bluesound does no MQA unfolding itself. The alternative is to get a DAC with MQA capability, but, for me, I don't find the upgrade in sound reproduction to be worth it. In fact, I find Spotify (Premium) to be more than enough for my needs. If I want to pursue higher fidelity, I would play my CD's. But, I have to say, I haven't played any for almost a year. I find the convenience and the completeness of the Spotify catalog outweighs any fidelity shortcomings.- And, in probably a couple of years, sound reproduction will have improved even more. If you want to ditch the PC, then get a Bluesound Vault for streaming local music. In fact, I may be going that direction, too. bob |
I know many music lovers use a pc/mac to stream music but in my opinion they are a terrible choice and a lot of people spend all kinds of extra money trying to fix the "dirty" USB or jitter issues, buying USB isolators, reclockers, purifiers, silver USB cables...etc. Funny thing is that many end up paying the same amount of money as buying a quality music server like an Aurender or a Melco. My advice is to save the trouble and invest in a good music server/streamer with linear power and a built in audio quality USB bus. I stream Tidal through an Aurender N100H connected to an Ayre Codex via AQ Coffee USB cable and I get excellent sound, no USB isolator or purifer needed. Not as good as the Aurender but the Bluesound devices seems to be pretty good as well. Good luck! |
Good question amritash and one I answered for myself a while back. I replaced my Mac mini with a Bluesound Node 2 and have been much happier without the endless round of updates served by Apple/Amarra/Audirvana/etc. The sound quality of the Node 2 is at least on par with my Mac. The DAC in the Node 2 is pretty good and if/when you want to upgrade, you can purchase an outboard DAC as funds allow. I think the Node 2 is hard to beat at its price point. |
How does the Sonica DAC fit in with the Node 2 and Aries Mini? https://www.oppodigital.com/sonica-dac/sonica-dac-Overview.aspx Is it Roon ready? |
I’ve been very happy with my Node 2 particularly the flexibility that it provides. I have used it as a "Streamer" as well as a preamp/streamer directly connected to my amplifier. The mobile app supports basically everything a preamp can provide - volume control, balance, tone control, including a subwoofer connection. The question to ask is what else is out there that is WiFi capable and provides all this in a single box, with decent quality, and supports MQA content for under $500. Bluesound reliability and on-line support has also been excellent. |
I have had a Dell laptop, quad core I7, 16 gigs of RAM, 1 tb internal disk drive, 4 tb external disk drive (to store AIFF files from recording CDs on iTunes, plus hi-res AIFF files purchased from HD Tracks), USB out to my DAC. A few months ago I started a subscription to Roon, whose "core" runs on the Dell, iPad app to control. I purchased a dedicated music server a few years ago, don't use it anymore. |
The Auralic Aries Mini would be your other choice in the $500 range that I’m aware of. I’m still on the fence on getting it or the Bluesound Node 2. There doesn’t seem to be a definitive answer as it sounds like they are both great products with some different features/capabilities. I’m hoping others chime in here as well. |