Imo that is SUPERB off-axis performance for a center channel speaker. Bravo!
The Center, Measured
As some may remember last year I embarked on a new active center channel project. Partly inspired if not suggested by Troel’s Gravesen’s huge and expensive Illuminator Center. I’m pleased with the final results, but since the topic of off-axis response has come up I wanted to share with you what I thought was excellent off-axis performance and the troubles of getting that in a 2-way or center channel speaker.
It’s also important to note that if I had to do this as a passive speaker I would have probably compromised somewhat in the performance in large part because I would not have used 4th order filters, or been able to add some subtle EQ.
Yes, of course it’s easy to criticize the frequency response, but I hope you’ll ignore the foibles and focus not on the on-axis response but on what it takes to get excellent off-axis response as well.
As a speaker builder this is what I shoot for and when I see very expensive multi-way speakers that can’t get there I do have to scratch my head.
I post this in the spirit of discussing pros and cons of design choices. I hope you please keep that in mind. :)
- ...
- 8 posts total
@audiokinesis Why thank you kindly good sir. Honestly it's better than I expected. That tweeter's natural off-axis performance is pretty outstanding. |
Not that I’ve looked at every set of off-axis measurements done on a center-channel speaker, but I’ve seldom seen off-axis response that good on a conventional speaker, let alone a center-channel speaker! (For anyone wondering what I’m talking about, the horizontal format of a center-channel speaker typically results in poor horizontal off-axis performance... when the listeners/viewers who are MOST IN NEED of good output from the center channel are those sitting well off to either side of the centerline.) |
Thanks, @audiokinesis - I think the foundation for this is that 4" midrange. Gravesen’s center channel designs get excellent off axis performance as well. The center speaker format for homes (vs. theaters) really is a challenge. Consider in a theater the three speakers behind the screen are identical. The purpose of the center, as you point out correctly, is to center dialogue and effects no matter where in the listening field a person sits, which would be well served by a vertical 3-way speaker or large coaxial. The physical challenge for homes is height. My own center is 12" tall, which while small compared to mega-centers like the Wilsons, is very tall for many home entertainment centers. The compromise is usually to create a 2-way center. Less common alternatives are 3-way’s with tiny mids and/or tweeters, and coaxials. If I were forced to downgrade this center and reduce the height to say 8" tall I’d probably change everything except the midrange which is the key to the off-axis response. I’d use a "low profile" tweeter with much smaller diameter body, and 5" mid-woofers. This would reduce dynamic range and bass, also small diameter tweeters tend to be less smooth sounding, perhaps small prices to pay for greater livability. :) |
- 8 posts total