The new Synergistic Research BLUE fuses ....


New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
"it's been shown that there are engineers who've tried fuses and though they can't explain why they make an improvement, they accept it. They know more than the naysayers here, make better products than just tinkering with junk at home, read the same manuals, are better educated, and still have the ability to keep an open mind."
So, because somebody accepts something they can't explain, they "know more" are "better educated" and have an "open mind" compared to people who either don't perceive a difference or who don't buy into the level of difference reported by others here?  Give me a break....I doubt you know who is or is not "better educated" and blanket disparaging statements like that are what start the fireworks around here. 
I'd say that the engineers behind PS Audio and Wyred4Sound fit that descriptor to an engineered "T". 

I find it funny that when one side comes up with a better argument than the other side (who can be shown to be downright nasty), or fighting fire with fire, as it's termed, that other side gets their panties up in an uproar. 

Not a very well "engineered" argument, huh?

All the best,
Nonoise
Oops, I didn't see Geoff's post about how to determine the real engineers from the pretend (?) engineers, by finding out who knows "exactly why these fancy fuses work."  Sort of a present-day variation on finding out who the witches are by holding them under water.
But tweaks aren’t voodo
Changing a fuse is not a tweak, if it needs to be changed, it's either one blown or two so aged because of switch on surges it’s bent up and carbonized. And just needs to be changed with the same $2 one, not a voodoo >$100 one.

A slow-blo fuse "ageing" right to left
https://peakpinball.com/wp-content/uploads/2013/01/fuse-8312-640x426.jpg

A fast-blo fuse "ageing" left to right
https://i.stack.imgur.com/0uqWX.jpg%20

Cheers George
For those who still refuse to "know" how an aftermarket fuse works:
HRC Fuse consists of highly heat resistant material (such as ceramic) body having metal-end caps, which is welded by silver current carrying element. The fuse body internal space is completely packed with a filling powder. The material, which has filled the insider space, may be plaster of Paris, quartz, chalk, marble, dust and cooling mediums etc. That’s why it carries normal current without overheating. The heat being produced vaporizes the silver melted element. Chemical reaction taking place between silver vapor and filling powder results in high resistance substance, which helps in quenching the arc in fuse.

and,
  • It clears high as well as low fault currents.
  • Do not deteriorate with age.
  • Having high-speed operation.
  • Provides reliable discrimination.
  • Require no maintenance.
  • Cheaper than other circuit interrupting devices with same rating.
  • Permit consistent performance
  • Fusing operation is fast without Noise and Smoke

This is from a normal site on fuses, based on years old knowledge, and available to anyone who would care to look at it. But that would be akin to actually trying it, wouldn't it?

All the best,
Nonoise