Where to go from here


I've got to rave about my setup. I started upgrading my system about a year ago after years of raising kids, etc. Had an old Denon 75 turntable with a Luxman arm, Adcom GFA 55 amp, Vandersteen 2ce speakers, dumpy little Sony CD player, Hafler preamp that I built years ago.

Started by changing out the speakers to Quad 22L2, then bought a Rega P3-24 with Elys II, Cary SLP-94L preamp, Cambridge Audio Azur 640 CD player, bought another GFA 555 and am running a vertical bi-amp to the Quads. Then started tweaking, mostly with the turntable because one of the reasons I stopped listening critically to music over the years is because CDs always sounded wrong to me. So, got a Herbie's mat, TTPSU, built a vibration platform with two hardwood boards and squash balls in between with a timbernation maple 2" slab (with adjustable spikes) on top then turntable, changed out the subplatter with a groovetracer and the counterweight with the Mitchell.

Also, got Morrow Audio connectors for the CD and Aurelex Subdudes for the speakers.

Holy Moly, the analog sounds incredible, especially after switching out the subplatter and counterweight. I'm begging people to come in and listen to vinyl. Even my old vinyl, cleaned up on a VPI 16.5 sounds great. I'm in analog heaven. But, even though my CDs now sound better because of the addition of the Cary tube preamp and Morrow interconnects, it still doesn't sound right a lot of the time.

My question: I've spent about 2k on the analog setup. If I spend that much on a CD player, what can I expect? Can I approach the quality sound I am getting from my analog rig?

Thanks for any help you can give me.
gmsasso
You might just want to try something different sounding to synergize with your system before dropping big bucks on a player.

If you have the money and want to, the best I've heard is the DCS Puccini.

Or maybe try using a tube DAC with your Cambridge as the transport. That can add some tube flavoring just to the digital and take the digital edge off if that is all that is bothering you.

I can vouch for the mhdt Paradisea. The mhdt Havana is said to be even better. Both come in under $1000.
Gmsasso asks the question, "...because of the addition of the Cary tube preamp and Morrow interconnects, it still doesn't sound right a lot of the time.”

I'm wondering if it might be the Morrow cables? I purchased a pair of their MA-1 interconnects, burned them in 24/7 for 500 hours. At present, I'm at about 550 hours. Each night I now listened to my system for about three hours. For two straight nights, the sound is gorgeous with the Morrows. Then the third night things sound bad. This pattern has repeated itself twice now. My assumption was that once the interconnects have been fully burned in, they will stabilize and will always sound good. Has anyone experienced this continued roller coster ride in good-to-poor sound from the Morrows?
What you describe cannot possibly be due to the wiring of the interconnects, but it might be due to dirty contacts at either end. Try cleaning your RCAs, both male and female with any good contact cleaner. Or you may have a loose tube socket in the Cary. Both channels? (You realize the 2009 portion of this thread is long dead and the OP probably is not aware of your post.)

Stringreen, He wrote "at about 550 hours..."
My experience, at least in my system, has always been that vinyl is significanly more envolving then digital. As long as you can listen through the clicks and modest groove noise (difficult for some), more organic, greater dynamics, much bigger sound stage. Digital definitely wins though in the "clean" sound department. Since I upgraded my preamp though, the digital has improved a lot and though I still far prefer the vinyl, digital is very enjoybable as well. By the way, vinyl on a record in great condition, is incredible but a lot of the music I enjoy the most is on my older records.