High Quality Fuses: Real Gains?

Hi-Fi uses silver burn wire (the only one that does) and silver ends. They also use the ciramic shields. It's gotten some VERY good reviews. That's were I'll be putting my $39 when it comes to fuses. It wasn't long ago I would have laughed at you for even suggesting to pay $40 for a fuse.
I accousticly treated my listening room and all of a sudden I can hear subtle changes. The MAC HC sound pipes where very audible. The porter Port, again, audible. I went to battery power on my Virtue Two and it was increadable. So, I'm a believer in cleaning up the connection to the ac tap in your wall. Anything between the amp, cdp, dac, ect.ect.. that will give a purer and cleaner connection is a plus. You also get the bennifits of a better sounding system. zman

OK, I just removed the fuses (Isoclear not HiFi Tuning, but I have those around here somewhere) on the back of my too resolving and refined Maggies, and tried the standard fuses again.

Yeah, no change, still sounds the same. I'll find those HiFi Tuning ones around here somewhere and try those.

So my vote is, makes no difference. But then again, my system is so refined I can't hear any difference. Well, actually, isn't that pretty much the opposite of how it should be??

I can tell you that when something sounds like crap upstream, I can hear it. I have tried many a piece of gear, only to turn around and sell it, including some great amps that just didn't match well with my other gear.

But, back to the fuses, I'm voting for Audio-Placebo effect. Then again, for under $100 it can't hurt to try!!

Just giving you a hard time Mac. I know you can take it. I've seen alot of you responces in power cord threads and had to rib you a little. I do agree with you on the fact that after the first upgrade, the bennifits don't ballance out the cost. It's better if you're going to spend a thousand dollars on a power cord to spend a hundred and take the 900 left and buy a better front end.
I think alot of people misunderstand what you're getting at when all you're saying is don't go overboard on cords or cables. Upgrade yes. But keep it in reason.

Hmmmm. I put three of the original HiFi Tuning fuses in my integrated amp after blowing two of the stock fuses, and it made a noticable difference in that application. Less grainy. Just another system enhancement like better wires, isolation, placement, room treatments, etc. Everything is additive, although benefit of fancy fuses seems to be system, application and ear dependent. You could conceivably drop a lot on these fuses and not hear an appreciable difference. I would start with your amp and see what it does for you there.

Hi-Fi Tuning fuses are not intended for speaker protection, but rather as an upgrade for AC power supply, or B+/rail voltages(though they MAY provide some audible differences in speaker apps). Best place to begin experimentation is the AC mains fuse on your power amp. If you can't hear a difference there: Forget about it!