High Quality Fuses: Real Gains?

Just giving you a hard time Mac. I know you can take it. I've seen alot of you responces in power cord threads and had to rib you a little. I do agree with you on the fact that after the first upgrade, the bennifits don't ballance out the cost. It's better if you're going to spend a thousand dollars on a power cord to spend a hundred and take the 900 left and buy a better front end.
I think alot of people misunderstand what you're getting at when all you're saying is don't go overboard on cords or cables. Upgrade yes. But keep it in reason.

Hmmmm. I put three of the original HiFi Tuning fuses in my integrated amp after blowing two of the stock fuses, and it made a noticable difference in that application. Less grainy. Just another system enhancement like better wires, isolation, placement, room treatments, etc. Everything is additive, although benefit of fancy fuses seems to be system, application and ear dependent. You could conceivably drop a lot on these fuses and not hear an appreciable difference. I would start with your amp and see what it does for you there.

Hi-Fi Tuning fuses are not intended for speaker protection, but rather as an upgrade for AC power supply, or B+/rail voltages(though they MAY provide some audible differences in speaker apps). Best place to begin experimentation is the AC mains fuse on your power amp. If you can't hear a difference there: Forget about it!

I changed from glass body to ceramic power fuse by default because I only had the correct value on hand in ceramic. I forgot all about it and didn't even run the rig until several days later.
Initially I could tell the rig sounded different even when cold, but went outside to do yardwork leaving the tuner playing. After a couple hours came back in and was *really* wondering what was up because the musicality was better overall with clarity and bass definition especially notable. Couldn't figure out why it sounded better although there was plainly a significant improvement.
It wasn't until a week or so later that I remembered the fuse change, so I reverted to glass and sure enough that was the proof. Restored the ceramic again and it's been better sounding ever since. So there you have it; I had done my own blind listening test without even realizing it.
Have never tried the really fancy fuses myself, but wouldn't be surprised if they are even better yet based upon this interesting experience.

I had the opportunity to chat with the head of the service department at said high end company and he had some interesting insight I thought I would share. He said that they have tried all the available aftermarket specialty fuses and that while they may sound "different" they don't necessarily sound "better". In some areas there were performance gains, in others losses. At the end of the day they decided that their stock (inexpensive) fuses were no better or worse than the expensive ones. But there is a big BUT....that how the fuse is positioned in the holder actually has more of an impact than the type of fuse itself. They do extensive listening tests with each product that comes off the line and part of this final production process involves changing the fuse direction and rotating the fuse until they get the best possible sound. Then they put a piece of electrical tape around the fuse holder so that it isn't moved during packing, shipping etc. I thought this was very interesting. So, while I had been leaning toward trying one of these aftermarket fuses, now I'm leaning the other way.