What Does Holographic Sound Like?


And how do you get there? This is an interesting question. I have finally arrived at a very satisfying level of holography in my system. But it has taken a lot of time, effort and money to get there. I wish there had been a faster, easier and less expensive way to get there. But I never found one.

Can you get to a high level of holography in your system with one pair of interconnects and one pair of speaker wires? I don't believe so. I run cables in series. I never found one pair of interconnects and speaker wires that would achieve what has taken a heck of a lot of wires and "tweaks" to achieve. Let alone all the power cords that I run in series. Although I have found one special cable that has enabled the system to reach a very high level of holography -- HiDiamond -- I still need to run cables in series for the sound to be at its holographic best.

There are many levels of holography. Each level is built incrementally with the addition of one more wire and one more "tweak". I have a lot of wires and "tweaks" in my system. Each cable and each "tweak" has added another level to the holography. Just when I thought things could not get any better -- which has happened many times -- the addition of one more cable or "tweak" enabled the system to reach a higher level yet.

Will one "loom" do the job. I never found that special "loom". To achieve the best effects I have combined cables from Synergistic Research, Bybee, ASI Liveline, Cardas, Supra and HiDiamond -- with "tweaks" too numerous to mention but featuring Bybee products and a variety of other products, many of which have the word "quantum" in their description.

The effort to arrive at this point with my system has been two-fold. Firstly, finding the right cables and "tweaks" for the system. Secondly, finding where to place them in the system for the best effects -- a process of trial and error. A lot of cables and "tweaks" had to be sold off in the process. I put "tweaks" in quotation marks because the best "tweaks" in my system have had as profound effect as the components on the sound. The same for the best of the cables, as well. For me, cables and "tweaks" are components.

Have I finally "arrived"? I have just about arrived at the best level that I can expect within my budget -- there are a couple of items on the way. In any case, I assume there are many levels beyond what my system has arrived at. But since I'll never get there I am sitting back and enjoying the music in the blissful recognition that I don't know what I am missing.

I should mention that there are many elements that are as important as holography for the sound to be satisfying, IMO. They include detail, transparency, coherence, tonality, and dynamics, among others. My system has all of these elements in good measure.

Have you had success with holographic sound in your system? If so, how did you get there?
sabai
I was one of the very first to employ cryogenics on a wide range of audio related items, that was 15 years ago. I discovered the mechanism by which the (Quantum) Intelligent Chip works 7 years ago. I invented a six degree of freedom sub-Hertz vibration isolation stand 15 years ago. I started using Belt tweaks 10 years ago. I came out with the (Quantum) Clever Little Clock, based on Belt concepts, 6 years ago. May Belt and i wrote the explanation for how the clock works 3 years ago. My Brilliant Pebbles suite of crystal based devices was the first audio product to address a wide range of room and system issues. That was 8 years ago. Blue Meanies, also Quantum in nature, were introduced last year. You might as well lock me up and throw away the key.
Sabai,
I want to make it clear that I`m not critical of your approach to building your audio system. I`ll assume we are in this hobby for love of music and good sound in our homes.There are those who will be more intense in their pursuit than others and see it more as a mission than I.

I`ll acknowledge up front some are far more 'serious' and hardcore than me. I just want a system that sounds natural,pure and realistic, one that allows an emotional connection to my music and pulls me into the performance. I have that and I`m very happy.Simple straight forward designs and concepts have served me best, (my system likely would`nt satisfy you). Others will have different ideas and follow another path. What ever gets you closer to your ultimate destination follow it.

Sabai, I`m not mocking your choices at all, I just relate more to what some others here have posted.Nothing more or less.I hope you do reach your goal.
Regards,
"Mapman,
Please answer the following questions:

1. What "tweaks" do you have in your system?
2. Do you have any Bybee products in your system?
3. Do you do series or parallel cabling?"

1. Power strip, ICs, Mu Metal RF shielding for low output phono step up transformer
2. No Bybee products. Have never seen or heard. Same true of many other tweak products out there.
3. I use a single cable between each pair of devices. THe exception is my main rig runs through a Niles speaker selector that outputs to in-wall speaker wiring that runs to several rooms, so technically the speaker wires running into and out of the Niles are in series.
"What you call my "strategy" has given stunning results. Since you have no experience with my "strategy" you are only left with speculation because you have no personal experience here. Just hot air."

I suppose everyone that takes a different approach from another could say that. Its not hot air for me to say I would not endorse your strategy based on my experience either. THat is not to say yours does not work. IT may very well. Its just not the approach I would take. I always like to keep things simple.

Sabai, does your system ever not sound "right"? WIth all those gadgets used, how much time does it take to isolate a problem to a specific device if it occurs? That has to be a disadvantage of your approach I would say. I simple system using as few devices as possible is much easier to troubleshoot when something is not working properly. That is a scenario we all have to deal with at some point in that all devices fail eventually and do not perform identically forever. I think that is an undeniable disadvantage to adding complexity versus keeping it simple assuming similar results can be achieved either way.