2. speakers
  3. 1211428524

Capacitor log Mundorf Silver in Oil

I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
ait
480 posts
 
I have just completed re-wiring my Infinity RSIIb speakers with Cardas Copper Litz wire, 11.5 gauge on the woofers, 15.5 gauge on the mids, and 17.5 gauge on the tweeters. Litz is very interesting stuff as each strand of the dozens in the bundle is individually insulated. This structure results in a lower AC impedance as frequency rises (a higher Q value). The re-wiring was part of a larger project to build external crossovers for these speakers, using Mundorf caps and Northcreek and Solen heptalitz inductors.

Litz wire can be difficult to work with, as the insulation must be removed from each strand before tinning/soldering, but I have found that a Dremel tool with a stainless steel brush makes the job very easy.

The results of my project are stunning. Be advised that I also built complete external crossovers, so of course that will have had a very large effect on the sound, but the litz wire I used to wire up the crossovers to the speakers certainly also contributed. The sound is crystal clear and very detailed, and a big improvement over stock.

So there is another wiring option for you.
volleyguy OP
789 posts
 
Thanks Ait

I was hoping to just get the Duelund Copper thinking it would be a good choice since all my caps are Duelund copper, but did not work out that way?

I have never heard Litz wire and likely will not so can not comment.

I can say so far so good with the Duelund Silver. I still have a couple of short pieces of Duelund copper to replace with Silver. So will wait to comment but can say the Silver wire makes the cheap copper sound like there is flat spots in freq response. Strange effect? Cheap copper seems to favour certain freq? Something I was not aware the wire was doing? I like the Silver much better but am not sure of all the reasons of why? I knew why I did not like Duelund copper in the mids and highs. (really slowed the sound down)

I want to make sure it is real as this stuff is not cheap!
duelund_coherent_audio
110 posts
 
I believe, that what you are hearing is more down to the shape of the wire and difference in dielectricum.

We intend to do a copper cable constructed in the same way as our silver wire, which should make comparisons more straight forward, as you will be experiencing more like for like, than currently.
volleyguy OP
789 posts
 
Duelund

I think you are right.

I am glad you are making a copper version of flat wire. (I would not call it foil as it is not that thin)

I have the feeling that is more important (shape) than the type of metal of the wire? Both copper and Silver have a signature?

I would like to replace my speaker wire (12 gauge Linn) stranded with some flat wire. (I think) At the Silver cost it is not happening.

So is it with wire the thinner and wider the better?
Do you get the best of both world's speed and low freq?
johnk's avatar
johnk
1,975 posts
 
Are you still doing this to the Klipschs? Wouldn't it have been better if performance was your true goal to address the transducers which are poor performing. The cost of the capacitors etc you place before these average at best transducers. Is kind of insane. For what you've spend you could run ALE;) Plus have you rebuilt the cabinets with better plys etc? still using the stock horn mids? If you have not addressed the poor cabinet transducers horns etc as well as crossover. Your just pissin in the wind. But if you enjoy it who am I to say your wrong. But I still will;) Much more to mod in k horn than the networks. And any thing I mentioned would make far greater performance increase than capacitor changes.
More to discover