Charles, I was talking to a well respected builder and he suggested that one can hear the skin effect caused when the surface of exposed copper wire becomes corroded. He pointed out that heat shrink does not keep air out and the copper may still corrode.
So the point is whatever you decide make sure the wire is properly covered to prevent air exposure. If you decide to clip the cap wire, then the wire you are using should be coated properly already.
Some use rubber paint, nail polish, urathane etc the cover the wire before covering with heat shrink.
Hope this helps....
So the point is whatever you decide make sure the wire is properly covered to prevent air exposure. If you decide to clip the cap wire, then the wire you are using should be coated properly already.
Some use rubber paint, nail polish, urathane etc the cover the wire before covering with heat shrink.
Hope this helps....