Circuit Breaker for Dedicated Lines


Is there a type of 20amp breaker that is better than another? I have run 12 gauge wire and plan on using FIM outlets. Would someone recommend a particular breaker?
bundy
I posted something along the same thought about 6 months ago. Someone answered it was against the electrical code to use a different brand of braker from the panel.

I just had to think that if the outlets make a diff so should the brakers...but I guess it's a bad idea for some reason...
Some have reported very good sonic results with ceramic fuses. But, those are not usually allowed by code anymore. Why? Because the 15, 20 and 30 amp fuses are all typically the same size and there have been too many instances where a 15 amp fuse blew and the homeowner decided to use a 20-30 amp fuse instead since it was convenient. Oops!

The National Electrical Code is online (I don't know the location but you can find it via a search on Yahoo). There are also local codes to consider. It's probably easier to just ask your electrician what can be done. Everyone here has reported marked improvements with dedicated lines regardless of fuse types, so that's the main thing. Good luck.
The worst sounding breaker is a GFI type so avoid that completely. But a ceramic base edison fuse is the best sounding above any ckt. breaker by far. If you can outboard a small sub-panel fusebox paralleled across your incoming main, then by all means try it. May not be allowed by all codes, but you can easily do this yourself with only rudimentary electrical skills; are you interested in good sound or rules?
Look on the inside face of the cover/door of your service panel. There should me a Brand name and "UL Listing". If the Service Panel accepts other brands of circuit breakers there will be a list of brands located somewhere on the label/listing.

Whenever you have additions or repairs to any “Life Safety” system in your home, hire a licensed professional. Call the area “Contractors Board” and confirm that the person doing the work is qualified and match the trade license number to the person doing the work.
Town Building official must approve all work. A $20 fee or so.

Note that if you do not get approval from the town building inspector and your house burns down to faulty / illegal work, your insurance will not reimburse you for damages.

If I had to make a choice, I'd take worse sound over a burned down house.