Best Used Solid State Amp for less than $5000?

Hey Y'all,

The Plinius, as I stated earlier in this thread, would be a wonderful choice but I would not sell the Sim Audio W5 short. I've heard this amp a few times driving Dynaudio 1.3 MkIIs and SEs and this amp paired up very well and did not struggle at all with these demanding speakers. I also want to mention that the Plinius SA-250MkIV toggles from class A/B to class A, meaning that in day to day use you may keep the amp in class A/B where the amp runs very cool and does not heat up the room like a furnace. On those occasions when you want to do some critical listening you can switch over to class A and enjoy how good this amp can sound, but make sure you have the air conditioner on in the summer time........John

Jrwr,

Plinius makes some great amps, and were I building my system from scratch, I'd consider a Plinius pre-amp and amp combo, but since I already have the SimAudio P-5 pre-amp, I'll stick with the likelihood of better synergy with the W-6. Unless of course the guy that's letting me audition the Stellavox wins the bet. In his opinion, once I hear the Stellavox, no other amp will satisfy. I still can't believe the things are only 10lbs each.

John_beavers,

My recommendation of the Plinius was for Russellrcncom, the clarification about the heat generated from the Plinius amp was made to address your statement about not wanting a furnace in your living room. If someone has a preference in amps, I've found it futile to try and dissuade them, I will only offer my opinion. Russellrcncom mentioned that the Plinius has made it to his short list and I was just nudging him towards an amp that has been very good for me.......John

Used to sell the Hales line - the T8 needs LOTS of guts behind it - the best I have heard with these speakers was the Classe CAM-350 monoblocks. The big BAT solid state amplifiers would also be a great choice. The Classe amps had a big stage with a black noise floor and were very consistient throughout thier power swings. Depends on how you like your sound - very fast and tight, a little lush - or somewhere in between. The PFR is an extremely fast linestage, which would work very well with the cam-350s. Just my opinion.

So many amplifiers, so little time....

I'm inclined to agree with John although for a slightly different reason. I really like the Plinius, but I think I would be tempted to run it mostly in Class A mode. Its not so much the disipation of heat I'm worried about, but the fact that more heat = more breakdowns + shorter component life.

What REALLY worries me is envisioning a situation of shipping the unit for repairs (assuming it can be done in the States and not have to go back to New Zealand).. We're talking 155# net (180# plus crated) here. Not exactly a day in the park. The Moon is at least manageable at 70#.

The thing I really am after is replicating a wide sound stage WITH depth. This brings me back to the Plinius and the Spectron. With the latter, I've become somewhat less enamored due to the fact that I've been told that you really need the Sense cables to get the most out of the amp. I'm looking at a long cable run (25'), and this could amount to a considerable expense.

Skropp, I will definitely check out the Classe' and the BAT's. Everyone, thanks again for the help and advise and happy (belated) new year to you.