Platform for amp

I decided on a maple platform.What should I put between the oak entertainment center and the maple block? I was thinking maybe felt.

Check out iso-blocks the rubber-cork-rubber thing as there popular with the maple platforms. Search the classifieds under tweaks and you'll see one person selling four of them for $10.00 there are a few that try to get $25 a set. Happy new year to all

Here is what I did guys.I bought the required material from a company that specializes in metals.A.S.A Alloys. They sell
stainless steel,nickel,aluminum.They deal with big orders though.I used 1/2" thick aluminum angle line sized @ 4"x6".
I cut four lenghts @ 30,1/4" long.I braced each set together with 2"x4" aluminum tubing.I drilled and tapped two 1/2" holes under each angle's 4" side.Thats where the 1/2"threaded feet are going.The final product looks massive and very impressive.So I made two amp stands with overall size 20,1/2"wide by 30,1/4" deep.Height including the stainless feet is 7,1/2".
Top platforms will be made out of maple and will be resting on the aluminum stands on brass cones.All my connections are with stainless steel screws to keep it non-magnetic and the tubing could be filled with sand or lead.Allthough that would make them very-very heavy.They are HEAVY now even though empty.
Regards
George

How about a picture? It sounds like you did a good job with construction.What is your system like?

You went to a lot of trouble for this "amplifier platform" only to screw up the sound by placing it all on top of a high mass entertainment center. And when you factor in the havoc that is being wreaked on the rest of your components with this behemoth, you can imagine what the end result is. Do yourself a favor and buy a decent equipment stand before you go playing around any more with isolation devices.

Oz