Budget system not up to expectations...


Hi.
I've just set up a new system, and I'm trying to troubleshoot it.
Hopefully, someone might have some insight for me.

I had an older Onkyo system (SV414 amp with 6CD) powering some old Infinity Studio Monitor 100s.

I'd been looking around to upgrade my speakers, and decided that B&W CDM1s sounded great for their pricepoint.
I found a used pair, that the seller let me demo, and they sounded great compared to what I'd previously had.
So upon purchase, I decided that it was time to move up from lampcord and buy some quality speaker cable.
I selected a used 10' of Analysis Plus Oval 9, which came with the T1 spades, that of course did not fit in the Onkyo barewire speaker connects.

So I had to upgrade my amp. I decided to go with a Denon AVR-1803 receiver over the Yamaha RX-V800.
Of course when the Denon arrived the speaker posts fit banana & barewire only (I could have sworn I read that it had 5-way!) which when speaking to Analysis Plus about retermination,
they said that AudioQuest makes a Spade to Banana adapter that would be just fine. It didn't make much sense to me that if the construction of a cable is so crucial, how an adapter could be harmless, but I took the manufacturer's word for it.

I noticed that my Apex DVD player had a digital coax out, so I figured, why not see how that fits in with the system, since I already own it, plus the cost of an AQ VSD1 coax.

So finally, this evening, I got a chance to hook it all up after a month of frugal planning.

While it sounds better than my old system, I can't quite tell if I'm being over-expectant, but it doesn't quite sound as good as when I demo'd the speakers on my old Onkyo connected with quickly stripped spare coax I had out in the garage.
The sound seems muffled, and the stereo field sounds completely fake. If I position myself near the sweet-spot, and lean from left to right, it feels like the corresponding speaker is simply louder, and there is no illusion of stereo space.
I auditioned the same CDs on both the Onkyo CD through Analog, and the Apex DVD on both digital and analog. (the Onkyo had much much more bass.)

Can anyone offer any suggestions?

System recap:

Denon AVR-1803
B&W CDM1 on Apollo A3 stands
10' Analysis Plus Oval 9 with T1 Spades & gold banana adapters
(used, so pre-burnt in)
Onkyo 6-Disc changer
Apex AD-660 DVD with Digital out
painter
Oval 9 is very revealing. Probably too much for your source and amplificaiton. Either upgrade your front end or switch to a ~$100 used cable (would recommend a Cu one from Audioquest). This is a typical "mismatch" issue, your cable is more expensive than you CD/amp. Or your room maybe a bad accoustic one, a revealing system may cause edgy sound in a bad room. Try to place speaker in different locations.
Please don't hear this as insulting but are you sure you have your speakers wired in phase?

will
Bishopwill's suggestion is the first place I would look. The comment about moving your head side to side, sounds like it's out of phase. Now, you could have all the colors matching correctly and either a speaker or the amp terminations are wired incorrectly (yes this happened to me once). If you have the Stereophile test CD, it's first cut is a phase test. We make a test CD, but didn't put the phase test on it--and may ad it for future.
Painter:

I will also have to concur with "Pe3046" when it comes to what type of system you are trying to put together with in reference to what type of electronics you are currently using. If this is going to be a mostly music system, then while your speakers and source (for now) appears to be fine, I cannot help but wonder why would you be using an a/v receiver to anchor your music system??? In such a system, I think that either an two channel integrated amplifier (from the likes of Arcam, Creek, or Rotel) or a "entry-level" preamp/power amplifier setup (from the likes of Adcom, NAD, Parasound, or Rotel) would make better sense. With exception to my preamp (I own the flagship Adcom GFP-750), my own amplifier (an Adcom GFA-545 MkII that is of 1991 vintage) is in the same price class as one you should be considering for your system as well. A change in cable wouldn't hurt matters much either. I currently use MIT cables (MITerminator 2 and MITerminator 3 Interconnects with MITerminator 2 Speaker Cables) in my system as well. With a few exceptions, a/v receivers are fantastic for movies, but they would be the last things I would pick if I am assembling a music system. But now, if this is going to be more of a movie system than a music system, then the choice to use a receiver becomes more valid then.

And by the way, how is that Apex DVD Player holding up??? If I am purchasing a cheap dvd player, I would think that Toshiba or Sony would make better choices as well.

And lastly, make sure your speakers are wired "in phase" before making any quick judgements. If they sound muffled and closed in, it could be that your system is "out of phase" as well. This can be easily corrected by making sure your amplifier terminals match up with your speaker terminals when you are connecting them together (i.e.: red terminal from receiver to red terminal at the speaker, and black terminal from receiver to black terminal at the speaker).

Check your connections first. If they seem to be intact, then I would check all of my equipment after that.

Good Luck........

--Charles--
Thanks for the replies!

I guess now if you'll oblige me, does anyone feel up to playing the "match a new integrated amp to my speakers and cables" game?
Hopefully I'll be able to return the Denon, but I am "stuck" with the CDMs and AP-O9s for now. Obviously price is an issue, but if there's an amazing enough unit, I might throw prudence out the window.
Being forced to choose, this will be a music system, as opposed to HT.

Budget: $400 (less if possible, but perhaps could go to around $600 if it was really, really warranted.)

Now on to the specific replies:

1. Natalie: Uhm, thanks for the vague advice. I'm accepting any donations you're offering to help better my system. In the meantime, I'll spend the money that I can.

2. Pe3046: I think I'm in agreement with you. It's all after-the-fact, tho. I thought my research was rock solid, but maybe I should've Posted (here) Before Purchace.

3. Jameswei: Sadly, I think the Onkyo/lampcord sounds slightly better... Could this be the Denon requiring burn-in time?

4. Gunbei: I wanted the best of both worlds, of course! Heh, yeah... I think I do have the curse--pretty badly, too.

5. Bluefin: Are you really saying to get rid of my cables to match the quality of the Denon? I couldn't recoop any cash from the cables at this point, so I'm hesitant to even consider it. My listening room is not ideal at this point, (building a new home soon) but I've situated the speakers as best I can.

6. Bishopwill: Just to be sure, I mis-wired them, and my head nearly imploded in the sonic vacuum! AAIIIEEE!

7. Rives: Done and Done. I think I'd be interested in one of your Test CDs, as I'm currently using my favorite discs as unquantifiable reference.

8. Chaskelljr2001: "...why would you be using an a/v receiver to anchor your music system???" 1.) I didn't set out to create an exclusive music system 2.) Incorrect interpretation of research / belief in web reviews.
"A change in cable wouldn't hurt matters much either." To a more expensive one? NoCanDo.
"And by the way, how is that Apex DVD Player holding up???" The Apex is my favorite little $69 gadget ever. It plays DVDs, DVD-R, VCD, SVCD, MPEG1s, MP3s, JPGs, and a few other odd formats. You can reprogram the ROM to make it region free, disable Macrovision and burn in a custom-made graphical background. Not very "phile" oriented, but a beautiful little H4xie workhorse.