Shelf Material - Neuance


I started a thread a month or so ago trying to find opinions on the best shelf material. I got some good new ideas, and tried them all out - except one, Maple Butchers Block. McMaster did not reply to my emails concerning Maple Butchers Block - not unusual, I have found many US companies turn a deaf ear to anyone from another country. I did try some local butchers block - stips of heart timber glued together, and the spectral balance was very good, but pace was poor. If Maple is better then it must be much lighter than what I was using (Weight = energy storage = poor pace). The best I tried was a very classy looking Neuance shelf, which you can find out about at www.neuanceaudio.com. I think subaruguru was also trying one and so it will be interesting to see what he thinks. It has a sound, but one that is difficult to pin down. It did not work well on my transport, flattening mid-range images for some reason, but worked well on everything else. I will order some more and therefore be able to get a better measure of its performance, and will try again with the transport (I have since learnt that I should not have used up-turned spikes). The Neuance is fast, it almost spotlights mid-range detail (you hear everything a vocalist is doing), it is very extended top and bottom. It might have a tad too much warmth in the lower mids and upper bass, but I am not sure yet. I love the way pianos sound with it - very much like the real thing (my daughter plays piano and so I hear it every day) - no exagerated presence, but all the natural harmonics of a real piano. I find it works best resting on small 1mm thick hard rubber pads, on a sand filled steel rack, with Vibrapods between shelf and component. I did not particularly like up-pointed spikes underneath it when I tried it but will experiment some more when I have some more Neuance shelves - it is hard to get the full measure of this shelf when I have only one. But I suspect this really is very close to an ideal shelf - very light, very rigid, no noticeable resonances - as I am using it at present. If, like me, you have been looking for a top quality shelf, then the Neuance is well worth a try. My only relationship to Neuance is that the man behind it offered me this ex-demo one for the cost of freight in response to my original post. When I order the next three shelves from him I will be offering to pay more generously for the first one.
redkiwi
Redwiki et al - I received my first Neuance shelf last week and installed it last Sunday under my LP12 on a Mana rack. Have been quite paient and not done a lot of listening to it so as not to prejudge it. Once I get a read on it under the LP12, plan to try it under my Muse 9 Signature and order another one if it is an improvement over the Mana damped glass shelf. Are EAR feet the best you've found so far between your CDP and the Neuance? Want ti make sure I have those on hand in that case. Has anyone tried Symposium Rollerblocks w/ a CDP and Neuance? They seemed to work well under my BAT preamp on a Mana shelf.
Alexc, I find the E-A-R feet to be even-handed and better than any stock rubber feet, and more neutral than Vibrapods. Certainly, I prefer to use them rather than any of the cones I possess, now that I use welded steel racks supporting Neuance shelves. But I have been experimenting with home-made roller-bearings and they are very promising under the CD player, but not under my amps.
Oh and by the way, you get a significant improvement if you use one rack per component - not always practical, but well worth it when you go down the "light and rigid" path. The Mana method of stacking racks works very well too.