Two Tonearm Turntable: Need Suggestions

Nottingham tables are often setup with two arms. The second arm pod is an option for about an extra $500, and I believe this is available on most of their models. See it many times on the Spacedeck. Cheers,
Spencer

Spencer, as you know, I've done several times on a Spacedeck. However, no 78 rpm! :-)

Dmenagh, are you lcked into a NEW table? Handy? Checkout the Lenco thread ("Home Despot") below for another possibility.

Don't write off the Teres. Chris has stated that you could get the motor controller wired for 78. The problem is as far as I know, you can only get two speeds out of one motor. Of course, the Teres does not offer pitch control, because one of it's (the Teres) features is dead-nuts speed control.

Acoustic Solid
Acoustic Signature
Redpoint
Galibier

and many others offer 2-3 tonearm setups and pitch control.

The 78 RPM feature may be harder, but not impossible, to get. You just need someone to alter one of the DC speed controllers for the above TTs to handle 78 as well as 33 and 45.

The Platine comes with 2 armboards as standard. The motor is normally only 2 speed. However, Graham Tricker at GT Audio in the UK does a bespoke battery PSU for the Platine. He is not averse to bespoke electronics, so he might well be able to adapt his PSU to run three speeds. Check his website - gtaudio.com - or email him on gtaudio@btinternet.com.

PS he also does Schroeder arms and Allaerts carts and he will ship worldwide.