Gallo REfF3's-All their cracked up to be?


Having won award from Absolute Sound,6Moons etc just wondering if how they compare with others in $25r00-$5K range.With Maggie 1.6/3.6's,Spendors,Harbeths,B&W Nautilus 803's etc not to mention used Quad 988.989,Infinity Preludes that have been seen as low as $3500,Gershman RX-20's used,offerings from Audio Physic (again good values used,heard Sparks where I liked low volume dynamics and read the Gallo's need to be pushed to come alive) well it's a crowded market.But seems like the twop speakers that have major buzz factor are the Gallo and NHT Xd system (selling for a bit over $6K).Live in sticks anbd would like to hear from folks who have put the Gallo's up against other speakers with empahsis on accurate midrange.Had as pair of Ref 2's but never got system set up around them nor dialed them in correctly.Was so nervous that tweeters might blow which were irreplacable got me nervous and I got rid of them pretty quickly.Have heard from dealers that Gallo can be unpleasant in cutomer support and lack of back tweeters could have been his resent ment that they did not sell better.But even though that's speculation is does say that they could be beter in support area.Maybe new models and sales might correct this.,They seemed to have great attributes but also weakneeses.Couldn't shake the feeling they were "gimmicky" in some respects but againn perhaps they were not dialed in proprly.Would lkike to run with 40 watt glass but could go 200+ solid state.Any auditions or owners who could give the good ,the bad and the ugly?
Thanks
Chazzbo
chazzbo
Hmm, interesting comments on the negative sound from the Gallos. My own experience was that my pair needed over 200 hours of break in before they stopped changing their sound and just sounded wonderful. Admittedly, I bought the Gallos based partly on the reviews, as in general, speakers will vary their sound depending upon the room they're in. That being said, the pair that I heard was broken in for over a month at the dealers, and was in a room devoid of room acoustic treatment. When I was shopping, I was prepared to spend up to about 5 times the cost of the Gallos, but after hearing them, I couldn't begin to justify it. They're that good. Yes, they need a long break-in. Yes, for me, they improved their imaging with the Brightstar stands. I think that was wholly dependent upon my room, and would probably be for you too. The sub amp is a bonus, but I don't always turn it on, and I remember thinking before it finally arrived from Gallo, that the bass, as is from my 120 watt tube monoblocks, was superb. You can just tweak it that last little bit with the solid state driving the second voice coil.
Unless someone's listening to a lemon pair, or a pair that's not broken in, I can't imagine a bad review of these speakers. Certainly not given their price, though as I said, for me they're value far exceeds their cost. Then again, brain imaging studies have shown that people will associate quality with cost or a product name, as they are evaluating products and given a relative value of the sample. Maybe, some people just can't get past that part of their brain to enjoy the sound from these speakers? That's not a negative comment towards anyone who doesn't like these speakers, it's just a comment on human physiology. In the end it doesn't matter. No one should feel talked into liking the sound of a product. Buy what sounds good to your own ears. For me though, this is one product I won't be replacing any time soon.
Finally had the DIY stands completed and running for a couple of weeks now and it's been quite an improvement. For photo's follow the link:

http://www.audiocircle.com/circles/viewtopic.php?t=28857&highlight=
Thanks to Kkm and Scott Stein I have a pair of these stands (they look identical to the ones pictured in Kkm's link) and can confirm the sonic improvements. Besides, I think they look rally neat! The slightly "outboard" spiked feet are from Parts Express, their part # 249-720 (cost is $22.99 for 4 feet, twice that for 8).

Between the bottom of the speakers and the tops of the bases, I'm using "dead balls" cut in half, but am still experimenting. With the dead balls, you can touch the sides of the bases and feel absolutely no resonance from the speakers even playing Flight of the Cosmic Hippo at full blast!

I really recommend this tweak. Dave
Kkm,
Nice stands, and well designed with the outboard feet that I'll presume you can adjust. (see my systems page for another variation) I don't see the method for attachment of your speakers to the stands though. How is that accomplished?
You should post your pictures on a systems page here on the 'gon.
As you said in your post re painting, preparation is always the key to a good finish. That and some 400-800 wet dry sand paper.
Enjoy-
Rolloff
First, I got the price of the Parts Express spikes wrong. They're just $14.80
for four, not $22.99. And the stands themselves can be seen at
www.steinaudio.com

Regarding the interface between speakers and stands, In the case of mine,
the speakers are simply sitting on the 4 dead ball halves (as I said, I'm still
experimenting, although these sound VERY good). The speakers are quite
stable, strange as this may seem. I can't seem to get a good photo but will
keep trying.

I prepped the stands with Rust-Oleum "Painter's Touch" sandable
primer, sanding after each coat, and finished with the Painter's Touch semi-
gloss black. If I had it to do over, I might go with flat black for a better
match, although the semi-gloss looks fine. Both primer and black paint were
via spray cans.

Yes, the feet are adjustable and I'm using a slight tilt, but not as much as the
stock feet provide. Dave