2. speakers
  3. 1146300728

Gallo REfF3's-All their cracked up to be?

Having won award from Absolute Sound,6Moons etc just wondering if how they compare with others in $25r00-$5K range.With Maggie 1.6/3.6's,Spendors,Harbeths,B&W Nautilus 803's etc not to mention used Quad 988.989,Infinity Preludes that have been seen as low as $3500,Gershman RX-20's used,offerings from Audio Physic (again good values used,heard Sparks where I liked low volume dynamics and read the Gallo's need to be pushed to come alive) well it's a crowded market.But seems like the twop speakers that have major buzz factor are the Gallo and NHT Xd system (selling for a bit over $6K).Live in sticks anbd would like to hear from folks who have put the Gallo's up against other speakers with empahsis on accurate midrange.Had as pair of Ref 2's but never got system set up around them nor dialed them in correctly.Was so nervous that tweeters might blow which were irreplacable got me nervous and I got rid of them pretty quickly.Have heard from dealers that Gallo can be unpleasant in cutomer support and lack of back tweeters could have been his resent ment that they did not sell better.But even though that's speculation is does say that they could be beter in support area.Maybe new models and sales might correct this.,They seemed to have great attributes but also weakneeses.Couldn't shake the feeling they were "gimmicky" in some respects but againn perhaps they were not dialed in proprly.Would lkike to run with 40 watt glass but could go 200+ solid state.Any auditions or owners who could give the good ,the bad and the ugly?
Thanks
Chazzbo
chazzbo
rolloff
130 posts
 
Kkm,
Nice stands, and well designed with the outboard feet that I'll presume you can adjust. (see my systems page for another variation) I don't see the method for attachment of your speakers to the stands though. How is that accomplished?
You should post your pictures on a systems page here on the 'gon.
As you said in your post re painting, preparation is always the key to a good finish. That and some 400-800 wet dry sand paper.
Enjoy-
Rolloff
dopogue
1,773 posts
 
First, I got the price of the Parts Express spikes wrong. They're just $14.80
for four, not $22.99. And the stands themselves can be seen at
www.steinaudio.com

Regarding the interface between speakers and stands, In the case of mine,
the speakers are simply sitting on the 4 dead ball halves (as I said, I'm still
experimenting, although these sound VERY good). The speakers are quite
stable, strange as this may seem. I can't seem to get a good photo but will
keep trying.

I prepped the stands with Rust-Oleum "Painter's Touch" sandable
primer, sanding after each coat, and finished with the Painter's Touch semi-
gloss black. If I had it to do over, I might go with flat black for a better
match, although the semi-gloss looks fine. Both primer and black paint were
via spray cans.

Yes, the feet are adjustable and I'm using a slight tilt, but not as much as the
stock feet provide. Dave
kkm
124 posts
 
Rolloff, they are not attached, I do have some threaded screw from the bottom of the speakers to the holes on top of the stands to prevent shaking or knocking off since I'm in earthquake territory.
rolloff
130 posts
 
Dave,
What did you use for the sides of the stands to mount the speaker spikes into? Do you have a part number for the feet too? I didn't see the rounded point models at Parts Express, though I was blown away by their real world prices. How refreshing to have someone sell hardware at hardware store prices, and not jewelry store prices.

Rolloff
dopogue
1,773 posts
 
Rolloff, just go to www.partsexpress.com and key in 249-720 under "Quick Search" at the upper left. The speaker spikes attach at the bottom (not the sides) of the stands . Both the brass points and the rubber feet come along with the set.
More to discover